iDevices Wall Outlet Installation & Setup Manual page 17

LED State Description
When Wall Outlet has lost the connection to the Wi-Fi network, (e.g., the link
®
is down) the LED slow flashes orange until the link is up.
Orange Flash
To initiate a device reset, which will clear all Wi-Fi and pairing information,
®
hold either ON/OFF button down for 10 seconds until the LED rapidly flashes
red. When the button is released the unit will reboot and re-enter the pairing
Red Flash mode.
When Wall Outlet receives a request to identify itself, or a software update is
being performed, it flashes purple.
Purple Flash
17