Related Manuals for EVO Gimbals EVO RAGE3
Summary of Contents for EVO Gimbals EVO RAGE3
- Page 1 English Manual V1.0 20810 Sockeye Pl #200 Bend, OR 97701 Support and Sales Questions: Tel: (866) 977-6688 Monday to Friday 9AM to 5PM Pacific Time or email support@evogimbals.com EVOGimbals.com...
-
Page 3: Table Of Contents
CONTENTS Packing List Disclaimer and Warning Get to Know The EVO RAGE3 Preparing and Charging the Batteries Installation Balance Adjustment How to Use APP Operations Calibration and Firmware Upgrade Specifications Product Dimensions Warranty My Notes... -
Page 4: Packing List
The EVO RAGE3 comes with the following items. If any item is missing, please Thank you for purchasing the EVO RAGE3. The information contains herein affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. - Page 5 4. Never use non-EVO Gimbals batteries. If replacement or backup is needed, please purchase new batteries from EVO Gimbals' official website or authorized channels. EVO Gimbals takes no responsibility for any damage caused by non-EVO Gimbals batteries.
- Page 6 Battery Disposal 1. Do not attach the batteries to a wall outlet or car charger socket directly. Always use a EVO Gimbals 1. Dispose the battery in a specific recycling area only after a complete discharge. Do not throw away the approved adapter for charging.
-
Page 7: Preparing And Charging The Batteries
GET TO KNOW YOUR NEW EVO RAGE3 PREPARING AND CHARGING THE BATTERIES Camera Control For the first use of The EVO RAGE3, please use the dedicated charging device contained in the package to Thumb Screw Interface fully charge and activate the batteries to ensure the normal use of The RAGE3. -
Page 8: Installation
(positive/negative end), then tighten the battery compartment. 3. Plug the adapter into the power outlet to start charging. Micro USB Cable Adapter Power Outlet Please use and charge batteries provided or approved by EVO Gimbals only. Tripod Micro USB Cable Adapter Power Outlet Get the tripod ready and tighten it to the 1/4”-3/8”... - Page 9 Please make sure the stabilizer is powered off or in standby mode when connecting the camera control cable in case of malfunctioned rotation. EVO Gimbals Control Cable Function Table Camera brand Canon Sony Panasonic...
-
Page 10: Balance Adjustment
BALANCE ADJUSTMENT BALANCE ADJUSTMENT Please make sure the camera is properly mounted and balanced, otherwise the stabilizer may fail The balance status of the stabilizer will greatly affect the run time. to start or operate normally. Level Adjustment on Tilt Axis Balance Adjustment on Tilt Axis Loosen the thumb screw on the quick release plate Loosen the thumb screw (rotate about 3 times);... - Page 11 BALANCE ADJUSTMENT CONTROL PANEL OVERVIEW Control Panel Description Balance Adjustment on Pan Axis Loosen the thumb screw on the pan axis. Adjust the pan axis until the camera can stay still while keeping the OLED Display vertical arm level when turned to the right/left side. Complete balance adjustment by tightening up all thumb Follow Focus screws.
- Page 12 Camera Connection Status Follow Mode * Marks functions that are only available for Canon cameras properly connected to the stabilizer. See more at EVO Gimbals Control Cable Function Table on page 12. Photo Mode Lock Mode Panasonic Camera Control Function Description...
- Page 13 STABILIZATION MODES POWER ADJUSTMENT & CAMERA CONTROL SETTINGS Motor Power Adjustment Stabilization Mode Description The motor force of the stabilizer needs to be adjusted (3 levels) to adapt the stabilizer to cameras and lens of Pan Follow Mode Pan Follow Mode Pan Follow Mode Pan Follow Mode different weight for ideal use.
-
Page 14: How To Use
USING RAGE3 INVERTED DR-E6 CHARGING FOR CANON CAMERAS How To Use The RAGE3 Inverted DC 8.0 V Power Outlet Usage The DC 8.0V power outlet on the side of the RAGE3 can be used for charging Canon 5D cameras through a DC Please ensure balanced installation of the power connector - DR-E6 (purchased separately). -
Page 15: App Operations
APP OPERATION APP OPERATION Main Features of the APP EVO Gimbals Remote App Download Download the EVO Gimbals Remote App from either the Apple App Store or Google Play. Calibration Screen: Calibration is required when deviations are found in the 3 axes and the... -
Page 16: Calibration And Firmware Upgrade
CALIBRATION AND FIRMWARE UPGRADE CALIBRATION AND FIRMWARE UPGRADE Six—Side Calibration When do you need to calibrate the stabilizer? Please calibrate the stabilizer when necessary to ensure normal use. 1. Power on the stabilizer and enter the standby mode, press menu, rotate the dial to “calibration” option, press right to enter the option. - Page 17 3. Using the Calibration Tool, follow the instructions to upgrade the firmware on the RAGE3 Please refer to "App Operations" for more information; Connect the stabilizer to the EVO Gimbals remote App via bluetooth. Click on the gear icon in the bottom left corner, then select “Calib” and follow the app instructions.
-
Page 18: Specifications
SPECIFICATIONS PRODUCT DIMENSIONS Standard Notes 210mm Input Voltage 9.8V 11.1V 12.6V Operation Current 110mA 6000mA 118mm Operation Temperature -10ºC 25ºC 45ºC Well balanced with camera Operation Time mounted Charging Time Charging current 2400mA 2.5h Weight 1250g Excluding batteries Tilt Angle Range -135º... -
Page 19: Warranty
DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. Labor: For a period of one (1) year from the original date of purchase of the product (“Labor Warranty”), EVO Gimbals will, DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED at its option, repair or replace with new or refurbished product, product determined to be defective. - Page 20 NOTES NOTES...
Need help?
Do you have a question about the EVO RAGE3 and is the answer not in the manual?
Questions and answers