Using The Pc Cam Function - Samsung VP-MM10S(BL) Owner's Instruction Manual

ENGLISH
Setting the Memory Camcorder : Using USB Mode

Using the PC Cam Function

You can use your Memory Camcorder as a PC camera for video chatting, video conference and
other PC camera applications.
Before your start!
◆ For PC Cam use, it is required to install the DV Driver.➥page 119
1. Press the [POWER] button to turn on the Memory Camcorder.
The Movie Record screen appears.
◆
2. Set the System Settings
The System Settings screen appears.
◆
3. Move the [Joystick] left / right to select <USB Mode>.
4. Move the [Joystick] up / down to select <PC-Cam> and then press the
[Joystick(OK)].
5. Turn on your PC.
6. Connect the Memory Camcorder to your PC with the USB cable.
7. The Memory Camcorder can be used as a PC Cam for programmes
such as Windows Messenger.
Various applications take advantage of the PC Cam function. Refer to
◆
respective product documentation for further details.
8. When finished, disconnect the USB cable.
[ Notes ]
✤ You must install the DV Driver. ➥page 119
✤ When the USB port connection changed, it may require DV Driver re-installation.
➥page 119
✤ It is recommended to use an AC Power Adapter during data transfer to avoid
unintended power outages.
✤ Microsoft Windows 98 SE or later operating systems support the PC Cam
function.
116 116
mode by pressing the [MODE] button.
System Settings
USB Mode
Mass Storage
PictBridge
PC-Cam
Move Select
3
System Settings
TYPE
USB Mode
Mass Storage
PictBridge
PC-Cam
Move Select
OK
4
System Settings
TYPE
USB Mode
Mass Storage
PictBridge
PC-Cam
Move Select
OK
Open the front cover and
System Settings
connect the USB cable.
USB Mode
Mass Storage
PictBridge
USB cable
PC-Cam
Move Select