Page 1
Item# 4398 Autumn 2-in-1 Mini Crib and Twin Bed Assembly Instructions Petit lit à barreaux Autumn 2 en 1 et lit de jumeau Manuel d’assemblage * Read all instructions before assembly and use of product. Keep instructions for future use.
Page 2
Thank you for purchasing a DaVinci nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.themdbfamily.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly.
Page 3
PARTS • PIÈCES Not to Scale/Pas à l'échelle A. Headboard B. Footboard C. Left side panel A. Tête de lit B. Pied de lit C. Panneau latéral gauche E. Front Left Leg E. Pied avant gauche D. Right side panel F.
Page 4
HARDWARE • ACCESSOIRES DE MONTAGE Bolts in Actual Size/Boulons (taille réelle) H1. 3” Phillips Head Bolt with nut (4) H2. 2-1/4” Phillips Head Bolt with nut (4) H1. Boulon à tête cruciforme H2. Boulon à tête cruciforme de 7,6 cm (3 po) (4) de 5,7 cm (2-1/4 po) (4) H3.
Page 7
* Make sure the mattress sup- port board (I-1&I-2) is installed FLAT SIDE UP. * Make sure the mattress sup- port board (I-1&I-2) is level. * S’assurer que le panneau de matelas (I-1&I-2) bien installé LE CÔTÉ PLAT VERS Do not overtighten the bolts. LE HAUT.
Page 9
Outside Extérieur * Rotate H10 clockwise to secure. * Tourner H10 dans le sens horaire pour fixer. Outside Extérieur...
Page 10
Finish Terminé * Recheck all screws and bolts to be sure they are fastened securely. *Revérifier le serrage de tous les boulons et des vis. DO NOT OVERTIGHTEN. NE PAS TROP SERRER. READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
CAUTION: Use ONLY mattress/pad provided by manufacturer (which must be at least 36.75 in. long by 23.25 in. wide and not more than 5 in. thick). Please refer to the label (sample below) on the inside face WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL WARRANTY AND REPLACEMENT PART REQUESTS.
Please DO NOT remove any wood screws in the WARNING: normal disassembly of the crib. ONE YEAR LIMITED WARRANTY: Failure to follow these warnings and We will replace any missing parts at the the assembly instructions could result time of purchase or any defective item in serious injury or death.
Page 13
Pour les lits équipés de traverses à denture, remplacer les • AVERTISSEMENT: traverses à dentures au cas ou elles sont endommagées, cassées ou desserrées. le non-respect des avertissements et des • En cas de finition, utiliser un produit non-toxique et instructions d’assemblage peut conduire recommandé...
Soin et Nettoyage • Ne pas gratter ou écailler la finition. Ne pas utiliser de produit L’enregistrement de votre produit est plus facile abrasif pour le nettoyage. Utiliser un savon doux et un tissu qu’avant. Vous pouvez enregistrer votre produit sur léger pour le nettoyage, rincer et sécher minutieusement et notre site Internet : www.themdbfamily.com/registrations complètement.
Page 15
Item# 5789 Full Size Conversion Kit (5789 - Sold Separately) Traverses de conversion (5789 - vendues séparément) This crib is convertible to a full size bed. M5789 Full Size Conversion Rail is recommended, please contact your retailer or purchase on www.themdbfamily.com Ce lit peut être converti en lit simple.
Need help?
Do you have a question about the 4398 and is the answer not in the manual?
Questions and answers