Low-range turbidimeter system
model t53 analyzer and 8320 sensor (91 pages)
Summary of Contents for GLI International GLI-9143
Page 1
Back to MANUALS Menu GLI_PortDissolvedOxMeter_9143_om_D401 Manual No. 9143 Revision 0-401 MODEL GLI-9143 HAND-HELD/PORTABLE DISSOLVED OXYGEN METER...
This meter is in compliance with European Community (CE) directives EN 50081-1 and EN 50082-1. GENERAL DESCRIPTION The GLI-9143 is a water-resistant, micro- TABLE OF CONTENTS processor-based, auto-calibration Dissolved Oxygen meter with automatic temperature PRELIMINARY EXAMINATION ......... 2 compensation (ATC).
O-ring sits properly inside ent in the electrolyte solution. This reading is the membrane cap. obviously incorrect. The GLI meter automati- Model GLI-9143 Portable D.O. Meter Rev. 0-401...
1. Remove the protective cap by gently twisting and pulling it off the probe (see Figure 1). FIGURE 1 Model GLI-9143 Portable D.O. Meter Rev. 0-401...
Page 7
FUNCTIONAL DESCRIPTION - PROBE on 3. Make sure that the O-ring is properly page 3) should always be bright and untar- seated in the membrane cap. nished. If it is tarnished or stained, which Rev. 0-401 Model GLI-9143 Portable D.O. Meter...
A 12 VDC power adapter can also be used to consequential damages, whether to person power the unit. or property. GLI International will not be liable for any other loss, damage or expense of any NOTE: The instrument uses the following kind, including loss of profits, resulting from configuration.
Need help?
Do you have a question about the GLI-9143 and is the answer not in the manual?
Questions and answers