1. Manuals
  2. Brands
  3. GLI International Manuals
  4. Measuring Instruments
  5. F53
  6. Operating manual

GLI International F53 Operating Manual

Flow monitor/totalizer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Back to MANUALS Menu
Worldwide Headquarters and Sales:
GLI International, Inc.
9020 West Dean Road
Milwaukee, Wisconsin 53224
U.S.A.
In the interest of improving and updating its equipment, GLI reserves the right to alter specifications to equipment at any time.
Rev. 1-201
GLI_FlowTotalizer_F53_om_D201

OPERATING MANUAL

Model F53
Flow Monitor/Totalizer
(Universal-mount 1/2 DIN style)
Phone:
[414] 355-3601
Fax:
[414] 355-8346
E-mail:
info@gliint.com
Web:
www.gliint.com
A
Viridor Instrumentation
Represented By:
company
Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F53 and is the answer not in the manual?

Questions and answers

Related Manuals for GLI International F53

Summary of Contents for GLI International F53

  • Page 1: Operating Manual

    Milwaukee, Wisconsin 53224 Web: www.gliint.com U.S.A. In the interest of improving and updating its equipment, GLI reserves the right to alter specifications to equipment at any time. Viridor Instrumentation company Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
  • Page 2 GLI’s web site at gliint.com. when viewed using Adobe’s free Acrobat reader. To get this reader, link to Adobe through GLI’s web site or visit Adobe’s web site at adobe.com. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 3: Important Safety Information

    FOR PERSONAL INJURY. CAUTION: A CAUTION LOOKS LIKE THIS. IT ALERTS YOU TO POSSIBLE INSTRUMENT MALFUNCTION OR DAMAGE. NOTE: A note looks like this. It alerts you to important, useful operating information. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
  • Page 4 WARRANTY GLI International, Inc. warrants the Model F53 to be free from defects in material or workmanship for a period of 2 years (24 months) from the date of shipment of this product from our facility. A warranty claim will not be honored if defects are...
  • Page 5 (XXX.X or XX.XX), and choose the measurement unit annunciators. &21),*85( 7(670$,17 (;,7 1. Press MENU key to display Ø Ø 2. Use key to select the “CONFIGURE” line, and press ENTER key to display (continued on next page) Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
  • Page 6 ENTER key to display a screen like keys to view . Use both choices (AUTO RESET or MANUAL RESET). With the desired choice displayed, press ENTER key to enter this selection. (continued on next page) Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...
  • Page 7 “SET SENSOR” line. De- pending on the selected sensor, pressing ENTER key displays: when “GLI POLYPROP/T,” “PVDF/T,” “316SS/T” or “BRASS/T” was selected. when “GLI PIPE MOUNT” was selected. (continued on next page.) Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
  • Page 8 To further configure the analyzer to your application requirements, use the appropriate CONFIGURE screens to make selections and “key in” values. Refer to PART THREE, Section 4 for complete con- figuration details. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 9: Table Of Contents

    2.1 Displaying Main Branch Selection Screen ..........34 2.2 Displaying Top-level Menu Screens..........34-35 2.3 Displaying Submenu Screens ............... 35 2.4 Adjusting Edit/Selection Screen Values ..........36 2.5 Entering (Storing) Edit/Selection Screen Values/Choices..... 36 Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
  • Page 10 4.8 Configuration Setting Summary (ranges/choices and defaults) ..63-65 SECTION 5 ANALYZER CALIBRATION 5.1 Important Information ................66 5.2 OFFSET BY or SET TO Calibration Adjustment ......67-68 5.3 Analog Outputs (1 and 2) Calibration..........68-69 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...
  • Page 11 Assigning User-defined Date ............88-89 Viewing Identification (ID) ..............89 Viewing Revisions................89 8.7 “Master Reset” Function................ 90 8.8 “Refresh” Function ................90 8.9 Protocol Command Set for PC Programming ........90 Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
  • Page 12 P A R T F I V E - S P A R E P A R T S A N D A C C E S S O R I E S ........................95 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...
  • Page 13 Schedule 40 Pipe IDs.......................46 Table B Schedule 80 Pipe IDs.......................46 Table C Relay Configuration Settings....................58 Table D Analyzer Configuration Settings (Ranges/Choices and Defaults).........63-65 Table E Relay Overfeed Timer Interactions with Other Analyzer Functions........80 Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
  • Page 14 Back to MANUALS Menu Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 15: Part O N E - I N T R O D U C T I O N

    The bottom auxiliary display line, shown in reverse video on Ø Ø the MEASURE screen, can be changed by pressing the × × keys to show analog output 1 and 2 mA values. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
  • Page 16 Parameter (or calculated measurement) values can be en- tered to define the endpoints at which the minimum and maximum analog output values are desired. For analog out- put setup details, refer to PART THREE, Section 4.4. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 17: Modular Construction

    Opening the analyzer door accesses terminals inside the enclosure for electrical connections. Line power must be connected to specifically designated terminals on TB3. WARNING: REMOVE LINE POWER BEFORE NEARING THIS AREA TO PREVENT ELECTRICAL SHOCK. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 18: Retained Configuration Values

    US standards and meets European IEC 801-series testing for electromagnetic and radio fre- quency emissions and susceptibility. Refer to Figure 1-1 and the specifications in Section 2.1 for more information. FIGURE 1-1 EMI/RFI Immunity Diagram Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 19: Specifications

    GLI Impeller Sensors .... 2000 ft. (610 m) maximum Non-GLI Sensors ....300 ft. (91 m) maximum Power Requirements ....90-130 VAC, 50/60 Hz. (10 VA max.) or 180-260 VAC, 50/60 Hz. (10 VA max.) Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 20: Section 2 Specifications

    1/2 inch (13 mm) conduit holes; nylon mount- ing bracket, and stainless steel hardware Mounting Configurations..... Panel, surface, and pipe (horizontal and vertical) mounting Net Weight ......... 3.5 lbs. (1.6 kg) approximately Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 21: Part T W O - I N S T A L L A T I O N

    2.2 Mounting lyzer using the supplied bracket and hardware. Determine the mounting method and attach the hardware as shown in the respective illustration. Refer to Figure 2-2 for analyzer installation dimension details. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 22: Figure 2-1 Analyzer Mounting Arrangements

    Back to MANUALS Menu PART TWO - INSTALLATION SECTION 2 - MECHANICAL REQUIREMENTS FIGURE 2-1 Analyzer Mounting Arrangements Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 23: Conduit Hole Requirements

    3H1230, for cable entries.) Seal unused cable entry holes with appropriate plugs. NOTE: Use NEMA 4-rated fittings and plugs to maintain the watertight integrity of the NEMA 4X enclosure. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 24: Electrical Connections

    NOTE: For easier wiring, connect line power and relay out- puts through the back conduit holes before connecting the sensors, analog outputs, and pulse outputs through the front holes. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 25: Flow Sensor(S)

    Refer to Figure 2-4 and connect the Sensor A cable (or in- terconnect) wires to Terminals 10 and 11 on TB1, matching polarity as indicated. Connect additional sensors to their respectively-marked terminals. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 26: Analog Outputs

    CALCULATION. The outputs are isolated from the inputs and earth ground, but not from each other. For output configuration details, see PART THREE, Section 4.4. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 27: Relay Outputs

    See Figure 2-5 for a general wir- ing arrangement. Always check control wiring to insure that line power will not be shorted by the relay switching action, and that wiring conforms to local codes. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 28: Pulsed Outputs (Contact Closure)

    To initiate these actions, momentarily connect TTL Termi- nals 8 and 9 on TB1, either locally or remotely. NOTE: During calibration, the selected output state (“HOLD,” “XFER” or “ACTIVE”) overrides the TTL input hold feature. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 29: Line Power

    FIGURE 2-7 FIGURE 2-8 Connecting 115 Volt Single Phase Connecting 230 Volt Single Phase Connecting 230 Volt Split Phase Line Power (90-130 VAC) Line Power (180-260 VAC) Line Power (180-260 VAC) Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 30: Part T H R E E - O P E R A T I O N

    D annunciators will appear when their relay operational state changes. When a relay overfeed timer is used and it has “timed out,” the respective relay annunciator con- tinuously blinks until the overfeed condition is resolved. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 31: Keypad

    ESC key once takes the display up one level to the MEASURE screen. This key can also “abort” the proce- dure to change a value or selection.) FIGURE 3-1 Analyzer Keypad Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 32: Measure Screen (Normal Display Mode)

    The MEASURE screen can show up to seventeen different readout versions. To select between them, in continuous Ö Ö Õ Õ key . These few loop sequence, press the MEASURE screen examples illustrate this feature: Ö Ö Ö Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...
  • Page 33 When the measured value is beyond the analyzer measur- ing range, a series of “ + ” or “ - ” screen symbols appear, respectively indicating that the value is above or below range. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 34: Menu Structure

    (shown in reverse video). Menu Screens 2. Press the ENTER key to display the top-level menu screen for that branch. The top-level menu screens for each main branch are: Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 35: Displaying Submenu Screens

    Ø Ø × × key changes the value/choice enclosed by pa- renthesis (second line on screen). Example: With this submenu edit screen displayed: Ø Ø pressing the key displays this related choice: Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 36: Adjusting Edit/Selection Screen Values

    With the MEASURE screen displayed, press and hold the ENTER × × Ø Ø key and simultaneously press the key until attaining the desired contrast. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 37: Analyzer Configuration

    With the desired language displayed, press ENTER key to enter this selection. NOTE: After a language is selected and entered, all screens will be displayed in that language. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 38: Configuring Sensors (A, B, C, And D)

    ENTER key to display a screen like Ø Ø × × keys to view all choices (x1, x10, x100, x1000 or x10000). If the displayed flow rate does not need a multiplier, select the “x1” multiplier. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 39: Set Decimal (For Displayed Flow Rate)

    A time constant (in seconds) can be set to filter or “smooth out” the sensor signal. A minimum value of “0 seconds” has no smoothing effect. A maximum value of “60 seconds” pro- vides maximum smoothing. Deciding what sensor signal Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 40: Select Flow Units (For Displayed Flow Rate)

    • OIL BARREL/HR • LITERS/DAY • IMP GAL/MIN • MIL LITERS/DAY • IMP GAL/SEC • CUBIC FT/SEC • IMP GAL/HOUR • CUBIC FT/MIN • MIL IMP GAL/DAY • CUBIC FT/HOUR • US GAL/SEC Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 41: Select Volume Units (For Displayed Volume)

    CHANGING VOLUME UNITS AUTOMATICALLY REPLACES USER-ENTERED VALUES FOR THAT SENSOR -- EXCEPT ITS CONFIGURATION AND CALIBRATION DATA -- WITH FACTORY-DEFAULT VALUES. 3. With the desired choice displayed, press ENTER key to enter this selection. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 42: Set Lo Flow Cutoff Limit

    NOTE: When line power is lost, counting is suspended re- gardless of totalizer reset mode. After power is restored, counting resumes from the suspended value. Ø Ø 1. With the screen displayed, use to select “TOTALIZER MODE” line. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 43: Enter Note (Top Line Of Measure Screen)

    SELECT SENSOR Type will accurately represent actual values, you must select the sensor type and then enter its specific sensor-related data. The data you enter depends on the sensor being used. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 44: Set Sensor Data

    After the “SENSOR A” submenu screen re-appears, use key to select “SET SENSOR” line and press ENTER key . Depending on the selected sensor, the sub-menu screen will be: GLI TEE MOUNT GLI PIPE MOUNT NON-GLI SENSOR Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...
  • Page 45 × × . Use keys to select the tee material, and press ENTER key to enter this selection. NOTE: Selected tee size determines available tee materials. This completes tee-mount sensor data entry/calibration. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 46: Gli Pipe Mount -- Set Pipe Id

    . Use arrow keys to adjust the displayed value to exactly match the actual pipe ID (inside diameter), and press ENTER key to enter the value. This completes pipe-mount sensor data entry/calibration. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 47: Non-Gli Sensor -- Set Slope And Set Offset Values

    Slope = [200 - 37] ÷ [155 - 25] = 1.253846154 NOTE: Round off the calculated slope to three places after the decimal. Also, if the calculated slope is a negative number disregard its sign. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
  • Page 48 . Use arrow keys to adjust the dis- played offset value to match the calculated offset from step 3, and press ENTER key to enter the value. This completes non-GLI sensor data entry/calibration. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 49: Configuring Calculation Measurement

    • FLOW B • VOLUME B • FLOW C • VOLUME C • FLOW D • VOLUME D 5. With the desired choice displayed, press ENTER key to enter this selection. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 50: Set Variable Y

    MEASURE screen. This can occur when using the X-Y formula, and measured VARIABLE Y is greater than measured VARIABLE X. 2. With the desired choice displayed, press ENTER key to enter this selection. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 51: Select Display Format (Decimal And Multiplier)

    XX.XX). With the desired choice displayed, press ENTER key to enter this selection. X-Y or X+Y (using volume variables) There are no display format choices since volume is always displayed without a multiplier and without a decimal. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
  • Page 52 XX.XX). With the desired choice displayed, press ENTER key to enter this selection. [X/Y] x 100 (using flow or volume variables) There are no display format choices since this ratio is always displayed in %. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 53: Configuring Analog Outputs (1 And 2)

    *An analog output can only represent the calculated measurement when two sensors are used and the analyzer has been correctly configured for CALCULATION. &21),*85( 7(670$,17 (;,7 1. Press MENU key to display . Use Ø Ø key to select the “CONFIGURE” line. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 54: Set 0/4 Ma And 20 Ma Values

    0/4 mA is desired, and press ENTER key to enter the value. Ø Ø 3. After the screen re-appears, use to select the “SET 20 mA VALUE” line. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 55: Set Filter Time

    Ø Ø × × keys to view both . Use choices (0 mA or 4 mA). With the desired choice dis- played, press ENTER key to enter this selection. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 56: Configuring Relays (A, B, C, And D)

    *A relay can only use the calculated measurement for its operation when two sensors are used and the analyzer has been correctly configured for CALCULATION. 1. With the submenu screen displayed, press ESC key once to display Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 57: Set Function Mode (Alarm, Control Or Status)

    Ø Ø × × keys to view the . Use choices (ALARM, CONTROL or STATUS). With the de- sired choice displayed, press ENTER key to enter this selection. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 58: Activation (Configuration Values)

    No settings available -- status relay is not configurable. NOTE: It is possible to enter values that always keep a re- lay active or inactive. To avoid this, be sure that “low” values are lower than “high” values. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...
  • Page 59 4. Use the same basic keypad operations described in previous setup procedures to enter the desired value for the displayed relay activation setting. 5. Repeat this procedure for each relay activation setting. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 60: Configuring Pulse Outputs (A And B)

    Now set the volume increment at which you want the pulse SET VOLUME output signal to activate. Increment Ø Ø 1. After the screen re-appears, use to select the “SET VOLUME” line. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 61: Set Pulse Duration

    ENTER 2. Press display screen like . Use arrow keys to set the displayed time duration for the pulse output to remain on, and press ENTER key to enter the value. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 62: Set Passcode (Feature Enabled Or Disabled)

    ENTER display screen like Ø Ø × × keys to view both . Use choices (DISABLED or ENABLED). With the desired choice displayed, press ENTER key to enter this selec- tion. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 63: Configuration Setting Summary (Ranges/Choices And Defaults)

    CAST IRON or BRASS 2.5 inch tee: CAST IRON or BRASS 3.0 inch tee: PVC, CPVC or PVDF 4.0 inch tee: PVC, CPVC or PVDF (Table D continued on next page.) Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
  • Page 64 SET FUNCTION? ALARM, CONTROL or STATUS Relays A, B, C, and D: ALARM OFF DELAY? 0-300 SECONDS 0 SECONDS ON DELAY? 0-300 SECONDS 0 SECONDS (Table D continued on next page.) Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...
  • Page 65 For FLOW (any sensor): depends on Present measured value of selected units and display format Sensor A. For VOLUME (any sensor): 0-999,999,999 with selected units For CALCULATION: depends on selected display format Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 66: Analyzer Calibration

    NOTE: When the passcode feature is enabled (Section 4.7), you must successfully enter the passcode before attempting a “calibration adjustment.” Also, an in-progress “calibration adjustment” can always be aborted by pressing the MENU key. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 67: Offset By Or Set To Calibration Adjustment

    “ + ” or “ - ” value. NOTE: To display a “ - ” sign for the value shown, Õ Õ press key while extreme left digit is Ø Ø blinking, and press key once. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 68: Analog Outputs (1 And 2) Calibration

    ± 2 mA. &21),*85( 7(670$,17 (;,7 1. Press MENU key to display 2. With the “CALIBRATE” line selected (shown in reverse video), press ENTER key to display Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...
  • Page 69 “20.00 mA” on the digital multimeter -- not the analyzer display, and press ENTER key to com- plete calibration of the maximum endpoint value. This completes Output 1 calibration. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 70: Test/Maintenance

    Ø Ø key to select the “TEST/MAINT” line. 2. Press ENTER key to display 3. With the “STATUS” line selected, press ENTER key to display the “STATUS: ANALYZER OK” screen. This Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...
  • Page 71 (Relay energized; LED is on.) NOTE: COUNTING only applies to control relays. 6. To end status checking, press ESC key or ENTER key (display returns to TEST/MAINT top-level menu screen). Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 72: Reset Vol (A, B, C, And D)

    MEASURE screen. 3. To end hold at any time and return the analog outputs back to their “active” states, press ENTER key (display returns to TEST/MAINT top-level menu screen). Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 73: Overfeed Reset (Relay Timers)

    Provide an Output 2 test signal in the same way using its respective menu screens. 1. With the top-level menu screen dis- Ø Ø key to select the “OUTPUT 1” line. played, use Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 74: Relay (A, B, C, And D) Operating Test

    NO and NC relay output terminals with a continuity meter. 4. To end this test and return to the TEST/MAINT top-level menu screen, press ESC key or ENTER key . Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 75: Pulse (A And B) Operating Test

    “EPROM VERSION” line. 2. Press ENTER key to view the EPROM version screen. 3. To return to the TEST/MAINT top-level menu screen, press ESC key or ENTER key . Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 76: Select Sim Measurement

    CALCULATION. 3. With the desired choice displayed, press ENTER key to enter this selection and return to the TEST/MAINT top-level menu screen. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 77: Sim Setting

    3. Use arrow keys to adjust the displayed simulation value to the desired value. 4. To end the simulation and return to the TEST/MAINT top-level menu screen, press ESC key or ENTER key . Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 78: Reset Configure

    3. Press ENTER key to reset most stored configuration settings to factory defaults (“RESET CONFIGURE: DONE” screen appears, acknowledging reset has oc- curred). 4. To return to the TEST/MAINT top-level menu screen, press ESC key or ENTER key . Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 79: Relay Overfeed Timer Feature

    A relay overfeed timer can, and often will, interact with other 7.5 Interactions with Other analyzer functions while those functions are in use. Table E Analyzer Functions on the next page explains common overfeed timer interac- tions. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 80: Table E Relay Overfeed Timer Interactions With Other Analyzer Functions

    On relay is turned Overfeed timer ured value (or a value you simulate) causes the relay “off” by simulation value was timed out to turn off. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 81: Hart Option

    Fax: [512] 794-8893 Website: www.hartcomm.org For information on the HART Communicator Model 275, contact: Fisher-Rosemount Systems 12000 Portland Avenue South Burnsville, Minnesota 55337-1535 USA Headquarters: [612] 895-2000 Service: [800] 654-7768 Fax: [612] 895-2244 Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 82: Analyzer Operating Modes For Hart Network

    HART-capable software (or software including GLI Device Specific Command sets). The GLI analyzer never initiates a command sequence, but always responds to commands from the master. Up to two master devices may be Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 83: Single Mode (Point-To-Point) Wiring Arrangement

    Figure 3-3 and connect all devices, including up to two masters, to the 4-20 mA analog Output 1 signal. FIGURE 3-3 HART SINGLE MODE (Point-to-Point) Wiring Connections (for single analyzer) Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 84: Multi-Drop Wiring Arrangement

    Output 1 signal, matching polarity as shown. 4. Up to two masters can be connected to the 4-20 mA analog Output 1 signal cable. FIGURE 3-4 HART MULTI-DROP Wiring Connections (for multiple analyzer network) Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 85: Hart Preferences Setup

    Required Preambles ber of preambles required by the analyzer from the master. 1. With the “GLI SETUP” top-level menu screen dis- played, select the “HART INFO” line and press key . Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 86: Device Preferences Setup

    The “Model” information screen shows the model number of Model Number the analyzer. 1. With the “GLI SETUP” top-level menu screen dis- played, select “DEVICE INFO” line and press key . Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 87: Viewing Manufacturer

    4. Press the F4 key to enter the tag, and the F2 key to send the tag to the analyzer. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 88: Assigning A Descriptor

    “DEVICE INFO” line and press key . 2. With the “DEVICE INFO” submenu screen displayed, key to display its select the “Date” line and press the related information screen. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 89: Viewing Identification (Id)

    3. With the “DEVICE REVISION” sub-submenu screen displayed, select the appropriate line and press the key to display its related information screen. 4. Press the F4 key to return to the “DEVICE INFO” sub- menu screen. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 90: Master Reset" Function

    Set for PC limited operability. The Device Specific Command set for all Programming existing GLI analyzers is available on request for creating a full-featured HART-capable program to run on an IBM- compatible PC. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 91: Part F O U R - S E R V I C E A N D M A I N T E N A N C E

    -- or -- • Replace the complete scaling board assembly contain- ing the relays. Refer to Part Five -- Spare Parts -- for the GLI scaling board assembly part number. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 92: Preserving Measurement Accuracy

    Sensor A measuring channel. Verify operation of other sensor channels in the same way using their respective terminals and menu screens. WARNING: DISCONNECT LINE POWER AVOID POSSIBILITY OF ELECTRICAL SHOCK. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...

  • Page 93: Verifying Interconnect Cable Integrity

    3. Verify that the analyzer flow rate reading is correct. If so, the interconnect cable and/or junction box connec- tions are probably faulty. Use a digital multimeter to check the interconnect cable for shorted or open wires. Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

  • Page 94: Analyzer Repair/Return

    (Recommendation: Use the original GLI shipping carton or an equivalent.) Also, GLI will not accept analyzers returned for re- pair or replacement unless they are thoroughly cleaned and all process material is removed. Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN) Rev. 1-201...
  • Page 95 Without HART option ......F53A2010-003 With HART option ........F53A2010-004 Power Supply/Scaling Board Assembly..F53A2020-001 Ribbon Interconnect Cable......1000A3355-001 Fuse Kit (one 80 mA fuse and one 100 mA fuse per package)......1000G3315-101 Mounting Hardware Kit ........1000G3228-101 Rev. 1-201 Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)

Table of Contents