ZOOMING IN AND OUT
Use the zoom function for close-up or wide-angle
recording. This camcorder allows you to record
using optical 10x power zoom and 1200x digital
W
T
zoom.
•
You can zoom with the zoom lever or the Control (W/T) button on the LCD panel.
Zoom magnifi cation over 10x is done through digital image processing, and is therefore called
•
digital zoom. Digital zooming is possible up to 1200x.
Set "Digital Zoom" to "On."
To zoom out
Slide the Zoom lever towards W (wide-angle).
(Or press the Control button ( ) on the LCD
panel.)
OK
W: Wide-angle
W
T
Tip
When using the zoom function, its speed can be decreased by slowly moving the Zoom (W/T) lever.
A fast moving increases the zoom speed. However, the Zoom (W/T) button on the display cannot adjust
the zoom speed.
•
The minimum possible distance between camcorder and subject while maintaining sharp focus is
about 5cm (about 1.96 inch) for wide-angle and 1m (about 39.4 inch) for telephoto.
•
Zooming during a recording may record operation sound of the zoom lever or zoom button.
•
Optical zoom preserves image quality, but during digital zoom the image quality may suffer.
•
Fast zooming or zooming in a far subject may cause slow focus. In this case, use "Manual
Focus."
page 51
•
It is recommended to use "Anti-Shake (HDIS)" with handheld recording if the subject is zoomed
in and enlarged.
•
Frequent use of the zoom function consumes more power.
page 55
page 52
OK
To zoom in
Slide the Zoom lever towards T (telephoto).
(Or press the Control button ( ) on the LCD
panel.)
T: Telephoto
OK
W
T
39