Miscellaneous Parts And Other Frus; Connector And Cable Guide - Lenovo ThinkPad X1 Hardware Maintenance Manual

Table 6. LCD FRUs (continued)
No. FRU descriptions
3
WLAN antenna kit
4
LCD rear cover assembly
5
Hinges
6
Infrared camera/Microphone card
7
LCD cable
8
Strip cover

Miscellaneous parts and other FRUs

FRU descriptions
Screw kit
• M2.0 x L2.5, flat, black(10)
• M2.0 x L2, silver (10)
• M2.5 x L5, nylon BZ (10)
• M2.0 x L3.5, nylon NI (20)
• M2.0 x L7 (10)
• M2.0 x L5, flat head, BK (10)
• WAF, M2.0 x L4, (10)
• M2.5 x L2.5 (10)
• M1.2 x L1.8 (80)
Base miscellaneous kit
• Mylar for system board (1)
• Rubber for cable routing (1)
• Thermal pad (1)
• Spacer thermal (2)
• WLAN antenna fix tape
• Mylar on memory module (2)
Display miscellaneous kit
• Red-dot mylar (1)
• Microphone rubber (2)
• LCD hold frame assembly (2)
• Microphone rubber for touch-IR model (2)
• Conductive tape on hinge (2)
• Mylar for IR camera (1)
GEO label kit

Connector and cable guide

This section provides information to help Lenovo authorized service technicians identify connectors and
cables for replacement purpose. To view each FRU and the exploded illustration of the computer, see "Major
FRUs" on page 50 and "LCD FRUs" on page 51.
Note: Depending on the model, some connectors or cables might not be available.
54
P1/X1 ExtremeHardware Maintenance Manual
Self-service
CRU
No
No
No
No
No
No
Self-service CRU
No
No
No
Optional-service
CRU
No
No
No
No
No
No
Optional-service CRU
No
No
No