Stereo usb cassette player with encoding to computer (9 pages)
Summary of Contents for Jensen JSCR-75
Page 1
CASSETTE PLAYER WITH MP3 ENCODER INSTRUCTION MANUAL JSCR-75 PLEASE READ THIS INSTRUCTION MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN IT FOR FUTURE REFERENCE.
FEATURES Rediscover your old cassette tapes on the go. ● Convert your old mix tapes and cassettes to MP3 and play them back on any MP3 player, ● or burn them to a CD. The portable design is easy to carry and enables you to play and transfer almost ●...
POWER SOURCE This Cassette Player is designed to operate on 2 x 1.5V ‘AA’ (UM-3) batteries (not included) or power up by PC when connected to the USB port of a PC. BATTERY INSTALLATION Open the Cassette Door by sliding EJECT downwards. Press and lift up the Battery Door in the direction as shown on the Battery Door.
Page 4
Click “Next” and wait until the installation is finished. Click “Finish” to complete the installation. USING THE CASSETTEMATE (MP3 ENCODING SOFTWARE) Open Software: Double-click the icon which can be found on your desktop. A window will pop-up that looks like this: Connecting the USB: Plug in the small end of the USB cable into the matching USB port on the Cassette Player (#4) and the large end of the USB cable into a matching USB port on your computer.
Page 5
(#1) down. Insert a tape into the Converter and close the door until it clicks. 4. Rewind the tape to the position where you would like to begin recording, making sure to allow a few extra seconds of silence to minimize unwanted trimming. From the Cassette-Mate software window, click the Tools button.
Starts the Recording Stops the Recording Creates a break in the recording. Stops the current track and creates a new one automatically Pauses the recording (Note: Does not stop playback on the converter.) Opens the Record Play menu: This is where you can listen to and save recorded tracks.
Page 7
Avoid installing the unit in locations described below: 3. Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. 4. Dusty places. 5. Places subject to constant vibration. 6. Humid or moist places. FREQUENTLY ASKED QUESTIONS (FAQs) WINDOWS OS Q.
Page 8
re-start the CassetteMate software. If you want to go back to recording more tracks after you have unplugged the device, you must first plug it back in to continue recording. If the computer does not recognize the device, close and re-start the CassetteMate software. Q.I want to save my files onto a CD, what format do I need to save/write/burn the files A.
Page 9
All necessary care is taken at the point of manufacture to ensure this unit will perform to the Jensen’s high quality standards. However if this unit becomes faulty within the warranty period please return it to the point of purchase with your proof of purchase for a replacement.
Need help?
Do you have a question about the JSCR-75 and is the answer not in the manual?
Questions and answers