Problemas Y Soluciones - Samsung SCD80 Owner's Instruction Book

Hide thumbs Also See for SCD80:
Table of Contents

Advertisement

ENGLISH
Troubleshooting
If these instructions do not solve your problem, contact your nearest
Samsung authorized service centrer.
Symptom
You cannot switch the
Check the battery pack or the AC Power Adapter.
camcorder on.
START/STOP button does
Check the POWER switch is set to CAM.
not operate while recording.
You have reached the end of the cassette.
Check the record protection tab on the cassette.
The camcorder goes off
You have left the camcorder set to STBY for more
automatically.
than 5 minutes without using it.
The battery pack is fully exhausted.
The atmospheric temperature is too low.
The battery pack is quickly
The battery pack has not been charged fully.
exhausted.
The battery pack is completely dead, and cannot be
recharged, Use another battery pack.
When you see a blue
The video heads may be dirty.
screen during playback.
Clean the head with a cleaning tape.
A vertical strip appears on
The contrast between the subject and the background is
the screen when recording a
too great for the camcorder to operate normally.
dark background.
Make the background bright to reduce the contrast or
use the BLC function while you are recording brighter.
The image in the viewfinder
The Viewfinder lens has not been adjusted.
is blurred.
Adjust the viewfinder control lever until the indicators
displayed on the viewfinder come into sharp focus.
Auto focus does not work.
Check the M.FOCUS menu.
Auto focus does not work in the Manual Focus mode.
Check the POWER switch. Set the power switch to PLAYER.
Play, FF or REW button
You have reached the beginning or end of the cassette.
does not work.
When you see a broken
This is normal operation and it is not a failure or
block image during the
defect.
RECORD SEARCH.
Explanation/Solution

Problemas y soluciones

Si las siguientes instrucciones no le permiten solucionar el problema,
póngase en contacto con un centro de servicio autorizado.
Síntoma
No es posible encender la
Compruebe la batería o el adaptador de CA.
videocámara.
El botón START/STOP no
Compruebe que el interruptor esté ajustado en la
funciona mientras se graba.
posición CAMERA.
Se ha llegado al final del casete.
Compruebe la pestaña de protección contra la grabación
del casete.
Ha dejado la videocámara en la posición STBY y sin
La videocámara se apaga
usarla durante más de 5 minutos.
automáticamente.
La batería está completamente descargada.
La batería se descarga con
La temperatura ambiente es demasiado baja.
mucha rapidez.
La batería no se ha cargado por completo.
La batería está completamente desgastada y no se
puede recargar. Use otra batería.
Se ve una pantalla azul
Los cabezales de vídeo pueden estar sucios.
durante la reproducción.
Límpielos con una cinta de limpieza.
Aparece en la pantalla una
El contraste entre el objeto y el fondo es demasiado
para que la videocámara funcione normalmente. Ilumine
línea vertical cuando se
el fondo para reducir el contraste o use la función BLC.
graba sobre un fondo
oscuro.
La imagen se ve borrosa
No se ha ajustado la lente del visor. Desplace botón de
en el visor .
ajuste del foco hasta que los indicadores se vean
enfocados.
El sistema autofoco no
Compruebe el menú M.FOCUS. El autofoco no funciona
funciona.
en la modalidad de enfoque manual.
Los botones PLAY, FF o
Compruebe el interruptor. Ajústelo en la posición
REW no funcionan.
PLAYER.
Ha llegado al principio o al final del casete.
Esta circunstancia es normal.
Se ve una cuadrícula en la
imagen durante RECORD
SEARCH.
ESPAÑOL
Explicación/Solución
79

Advertisement

Table of Contents
loading

Table of Contents