Related Manuals for Luxul XWC-1000
Summary of Contents for Luxul XWC-1000
- Page 1 QUICK INSTALL GUIDE Wireless Controller XWC-1000 Package Contents: XWC-1000 Wireless Controller „ Rack Mount Kit „ Power Cord „...
- Page 2 Controller Setup Sequence: Once you configure the XWC-1000 Wireless Controller, the Controller will automatically configure and manage all compatible APs on the same subnet. APs can be added or removed at any time, however. A DHCP server is required on the network.
- Page 3 Physical Installation Connecting Devices: The XWC-1000 Wireless Controller simply connects to the network along with any compatible Access Points. PoE Injector or Compatible PoE Switch Wireless Controller...
- Page 4 AP. Ideally, roaming clients should see signal strength of two overlapping APs in the range of -60 to -70 dBm at the midway point between two APs Note: Visit luxul.com/ap-placement for details on how to select and optimize AP placement.
- Page 5 „ Preparing for Access IP Addressing If the XWC-1000 is connected to a network with a 192.168.0.X address scheme, and your computer shares a similar address on the same network, you can skip to the next step, Access and Setup.
- Page 6 APs on the same network. You may add or remove APs to or from the managed profile at any time. Smart Tip: For more information on setup and configuration best practices, visit luxul.com/smart-tips.
- Page 7 Hardware Operation Selecting front-panel LED color Use the switch on the rear panel of the XWC-1000 Wireless Controller to switch the Power and System LEDs on the front panel between green and blue to best match the equipment in the rack where the Wireless Controller is sharing space.
- Page 8 Luxul product. © Copyright 2016 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and Simply Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other trademarks and registered trademarks are property of their respective holders.
Need help?
Do you have a question about the XWC-1000 and is the answer not in the manual?
Questions and answers