Setting the CAM : Setting the System
Viewing Version Information
You can view the firmware information.
1. Slide [Mode Selector] down to turn on the CAM and slide it down again.
◆
The Mode Selection screen appears.
2. Slide the [ ▲ /▼ ] switch to select
3. Slide the [ ▲ /▼ ] switch to select <System> and press the [OK] button.
4. Slide the [ ▲ /▼ ] switch to select <Version Info> and press the [OK] button.
◆
The version of the CAM is displayed.
5. Press the [OK] button to finish viewing version information.
Note
✤
If you select <Back> in the menu, the previous menu appears.
System Settings
and press the [OK] button.
ENGLISH
Mode Selection
2
MP3
Voice Recorder
File Browser
System Settings
Back
System Settings
3
Display
Date/Time
System
Memory
Back
Settings: System
4
Demo
Off
Video Mode
Start-up
Reset
File No.
Beep Sound
On
Version Info
Settings: System
Off
Demo
Samsung Elec. Co. LTD
Miniket DSP 0.01X
Language
English
Mar 04 2005 22:09:25
Previous Mode
Start-up
Micom 0.02X
Mar 07 2005 01:09:26
Sys. Sound
High
Version Info
Close
99
99