Samsung SC-MM10S Owner's Instruction Book page 131

Memory camcorder
Hide thumbs Also See for SC-MM10S:
Table of Contents

Advertisement

ENGLISH
Troubleshooting
Symptom
Possible Causes
Focus does not adjust
Focus is set to manual mode
automatically
Recording is being done in a dark
place
Lens is covered with
condensation
The Memory card will not
The memory card is in wrong
load properly
position
A foreign object is in the memory
card slot
Color balance of picture is
White balance adjustment is
not natural
required
Digital zoom does not
The effect(Digital special effect) is
work
applied
Files stored in the memory
Memory card is protected
card cannot be deleted
File is locked
Images on the LCD
Ambient is too bright
monitor appear dark
Ambient temperature is too low
Rear of the LCD monitor is
Prolonged use of the LCD
hot
monitor.
Play, rewind and fast
The Photo Mode is selected
forwarding do not work
Memory card cannot be
The Movie Mode is selected
played back (Photo mode)
No picture is taken
Not enough free memory space
is remaining
Memory card is formatted by
different devices
Built-in flash does not fire
Light is forced to cancel
Light is not available for recording
Cannot record a movie
The 'Photo Mode' is selected
image.
The LCD monitor turns off To save power consumption,
the LCD monitor and Memory
Camcorder's power turns off if
there is no button operation for a
certain period of time (depending
on operation mode).
Solución de problemas
Measure
El enfoque no se ajusta
Set focus to AUTO
automáticamente.
Use the flash or light the
location
Clear the lens and check the
focus
Insert the memory card
La tarjeta de memoria
properly, page 33
no se cargará
Clear the memory card slot
correctamente.
Set proper white balance,
El balance de color de la
imagen no es natural.
pages 42, 60
El zoom digital no
Turn off the effect(Digital
funciona.
special effect), pages 44, 62
Los archivos
Remove the protection tab of
almacenados en la
memory card (except MMC)
tarjeta de memoria no se
Remove the lock on the file,
pueden borrar.
pages 53, 72, 80, 87, 92
Las imágenes del monitor
LCD aparecen oscuras.
Adjust the brightness and
angle of LCD
Low temperatures may
produce a dark LCD display
This is not a malfunction
La parte posterior
del monitor LCD está
Close the LCD monitor to turn
caliente.
it off, or turn your device off to
Reproducir, rebobinar
cool down
y avance rápido no
Select 'Movie Mode' and
funcionan.
select 'Play'
La tarjeta de memoria
Select 'Photo Mode' and
no se puede reproducir
(Modo Foto)
select 'View'
No se toma ninguna
Delete files from the memory
imagen
card or internal memory
Format the memory card on
the Memory Camcorder
Select different Flash mode,
El flash incorporado no
se dispara
page 63
Select 'Movie Mode'
No se puede grabar el
Operating any button will turn
video.
the Memory Camcorder on
Se apaga el monitor LCD. Para reducir el consumo de
Pressing the button once
again will operate its function
Síntoma
Posibles causas
El enfoque se ha colocado en
modalidad manual.
La grabación se ha realizado en
un lugar oscuro.
El objetivo se ha cubierto con
condensación.
La tarjeta de memoria está en una
posición incorrecta.
Existe un objeto extraño en la
ranura de la tarjeta de memoria
Hay que realizar el ajuste de
balance de blanco.
Se aplica el efecto (efecto especial
digital).
La tarjeta de memoria está
protegida.
Archivo bloqueado.
El ambiente es demasiado
brillante.
La temperatura ambiental es
demasiado baja.
Uso prolongado del monitor
LCD.
Se ha seleccionado el modo de
foto.
Se ha seleccionado el modo de
video.
No queda suficiente espacio
disponible en la memoria.
La tarjeta de memoria se ha
formateado en dispositivos
diferentes.
El foco se ha bloqueado para
que no funcione.
El foco no está disponible para
grabar.
Se ha seleccionado el modo de
foto.
energía, la pantalla LCD y la
Videocámara con memoria se
apagan si no se utiliza ningún
botón durante cierto tiempo
(depende de la modalidad de
funcionamiento).
ESPAÑOL
Medida
Coloque el enfoque en AUTO.
Utilice el flash o luz en este punto.
Limpie el objetivo y compruebe el
objetivo.
Inserte la tarjeta de memoria
correctamente, página 33.
Despeje la ranura de la tarjeta de
memoria.
Defina el balance de blanco correcto,
página 42, 60.
Desactive el efecto (efectos especiales
digitales), página 44, 62.
Retire la pestaña de protección de la
tarjeta de memoria (excepto MMC).
Anule el bloqueo del archivo, página 53,
72, 80, 87, 92
Ajuste el brillo y el ángulo del monitor
LCD.
Las bajas temperaturas pueden
oscurecer la pantalla LCD.
Este hecho es normal y no se trata de
ningún defecto.
Cierre la pantalla LCD para apagarlo, o
apague el dispositivo para enfriarlo.
Seleccione 'Movie Mode' y 'Play'
Seleccione 'Photo Mode' y seleccione
View.
Borre archivos de la tarjeta de memoria
o de la memoria interna
Formatee la tarjeta de memoria en la
Videocámara con memoria.
Seleccione un modo de Flash diferente,
página 63.
Seleccione el modo de video.
El accionamiento de cualquier botón
encenderá la Videocámara con
memoria.
Si se presiona el botón una vez más de
nuevo activará esta función.
131
131

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-mm10sblSc-mm11sblSc-mm11sSc-mm12sblSc-mm12s

Table of Contents