Samsung SC-D363 Owner's Instruction Book page 96

[ ENGLISH ]
USB Interface (SC-D362/D363/D364/D365/D366 only)
1. Connect a USB cable to the USB jack on the PC.
• If a USB cable is connected to the Camcorder's USB jack, the
Audio/Video Cable and Multi Cable are disabled.
2. Connect the other end of the USB cable into the USB jack on the
Camcorder. (USB jack)
• If PC is connected with the USB to the Camcorder, only the [Power]
switch, [Mode] switch, [Zoom] lever can be operated.
Disconnecting the USB Cable
÷ After completing the data transmission, you must disconnect the cable in
the following way:
1. Select the removable disc icon and click the right mouse button to select <Eject>.
2. Select <Confirm> and disconnect the USB cable when the Windows Splash screen appears.
[ Notes ]
• If you disconnect the USB cable from the PC or the Camcorder while transferring, the data transmission will stop and
the data may be damaged.
• If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB
devices, the Camcorder may not work properly. If this occurs, remove all USB devices from the PC and reconnect the
Camcorder.