Samsung SC-D354M Owner's Instruction Book page 85

Digital video camcorder
Table of Contents

Advertisement

ENGLISH
USB Interface
(SC-D352/D353/D354/D354M/D355 only)
Using the PC Camera Function
To use the PC Camera function, the DV Driver, Video Codec and DirectX 9.0.
programs must be installed in the PC.
You can use this Camcorder as a PC CAMERA.
When you connect to a Web site that provides video chatting functions, you
can use your Camcorder for such functions.
When using this camcorder for video conferencing (such as NetMeeting),
voice communication may not be supported depending on the video
conferencing software. In this case, connect an external microphone to the
soundcard of the PC to enable voice communication.
Using the Camcorder with PC Net-meeting program installed, you can
participate in video conference.
The PC CAMERA's screen size (Transferred video frame rate for the PC
Camera function is max 15 fps.)
I
320X240 (QVGA) pixels for USB 1.1 connection.
If PC is connected with the USB to the Camcorder, only the Power, Mode,
Zoom and NITE PIX switches can be operated. (SC-D352/D354/D354M/D355
only)
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE.
(SC-D353/D354/D354M/D355 only)
3. Connect one end of the USB cable to the USB jack on the
Camcorder and the other end to the USB connector on your
computer.
Interfaz USB
(Sólo SC-D352/D353/D354/D354M/D355)
Utilización de la función "PC Camera"
Para utilizar la función PC Camera, deben instalarse en el PC los programas
Video Codec, DirectX 9.0.
Esta videocámara se puede usar como una cámara para PC.
Si se conecta a un sitio web que ofrezca funciones de chat con vídeo, puede
utilizar la videocámara para este fin.
Al utilizar esta videocámara para videoconferencia (como NetMeeting), es
posible que no se admita la comunicación de voz dependiendo del software
de videoconferencia. En este caso, conecte un micrófono externo a la tarjeta
de sonido del PC para activar la comunicación por voz.
Puede realizar videoconferencias conectando la videocámara a un PC que
disponga del programa NetMeeting.
Tamaño de pantalla de la cámara para PC. (La velocidad de fotogramas del
vídeo transferido para la función PC Camera es de 15 fps.)
I
320X240 (QVGA) píxeles para conexión USB 1.1.
Si la videocámara se conecta a un PC a través del puerto USB, se desactivarán
todos los botones excepto el interruptor Power, el interruptor Mode, el interruptor
Zoom y el interruptor NITE PIX. (Sólo SC-D352/D354/D354M/D355)
1
1. Coloque el interruptor Power en CAMERA.
2. Coloque el interruptor Mode en TAPE.
3. Conecte un extremo del cable USB al conector USB de la
2
(Sólo SC-D353/D354/D354M/D355)
videocámara y el otro al conector USB del PC.
ESPAÑOL
85
85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents