Midi Controller Configuration - E-RM Multiclock User Manual

14 mul ticl ock - us er man ual
Analog Configuration. This mode can
also be used with DIN Sync instruments
to implement clock dividers.
Midi CC Configuration. Messages can
be routed to different outputs.
START Mode
can be set to emit a trigger pulse (
skip the first clock pulse after start (
Gate
( ). Be sure to check your modular sequencers manual if you
are in doubt.

Midi Controller Configuration

If you happen to have unused clock channels on your multiclock
and need a basic MIDI Controller for one of your synths, simply
configure the knobs to emit MIDI Control Change commands by
Chn Mode Ctrl
setting to
You can configure the output port, MIDI Channel and control
change number. Knobs send values between 0 and 127, buttons
toggle between the min and max value, button state is indicated by
the channel's status led.
Trig sk
) or simply act as a gate
.
Trig.
), optionally