System Setup; Connections And Controls - Bose S1 Pro Owner's Manual

System Setup

Connections and Controls

The S1 Pro control panel provides the necessary connectors, controls and indicators for operation.
q
w
e
r
t
y
u
Use Channel 1 and 2 inputs for microphones and musical instruments. Integrated ToneMatch® signal
processing allows microphones and instruments to sound their best. Use Channel 3 for Bluetooth®
connectivity and line-level inputs.
Signal/Clip indicator: Displays the input signal status in color.
q
Green: Signal present
Red: Signal clipping
Note: Reduce the corresponding volume control to prevent signal clipping.
Volume control: Adjust the volume of your microphone, instrument or audio source.
w
Treble control: Adjust the high-frequency balance of your microphone or instrument.
e
Bass control: Adjust the low-frequency balance of your microphone or instrument.
r
Reverb control: Adjust the amount of reverb applied to your microphone or instrument.
t
ToneMatch switch: Move the switch to the
y
Channel input: Analog input for connecting microphone (XLR) and instrument (TS unbalanced) cables.
u
Aux input: Use a 3.5 mm TRS cable to connect a line-level audio source.
i
Line Output: Use a ¼" TRS cable to connect the line-level output to the Channel 1 or 2 input of a second
o
S1 Pro to create a mono, two-loudspeaker setup.
Note: Line Out is post mix.
Service port: Micro-USB connector for Bose service use only.
a
Bluetooth Pair button: Used to set up pairing with Bluetooth-capable devices, such as mobile phones,
s
tablets and laptops.
Owner's Guide • S1 Pro System
1 2
SIGNAL SIGNAL
or position to enable the ToneMatch preset.
3
SIGNAL
i
System Setup
s
a
o
English • 7