getting started
INSERTING/EJECTING THE BATTERY
Purchase extra batteries to allow continuous use of your camcorder.
To insert the battery
1. Open the battery cover by sliding the
OPEN/CLOSE switch toward OPEN.
2. Insert the battery into the battery slot until
it locks.
•
Make sure that the SAMSUNG logo is
facing up and the battery is placed as
shown in the fi gure.
3. Close the battery cover by sliding the
OPEN/CLOSE switch toward CLOSE.
Samsung is not responsible for problems that are caused by using unapproved batteries. If you use
batteries from other manufacturers, there is a danger of overheating, fi re, or explosion.
To eject the battery
1. Open the battery cover by sliding the
OPEN/CLOSE switch toward OPEN.
2. Slide the Battery release switch in the
direction as shown in the fi gure.
3. Close the battery cover by sliding the
OPEN/CLOSE switch toward CLOSE.
Battery release switch
17