Samsung HMX-H100N User Manual page 64

connection
Connecting to a normal (standard defi nition) TV (16:9/4:3)
• This connection is used when downconverting recorded HD-quality images to SD-quality images for playback.
• When playing back HD-quality (1920x1080 or 1280x720) movie images on a SDTV, the images are
downconverted to 720x480 standard defi nition images.
Method 1
HD camcorder
Signal fl ow
Component/AV cable
1 . Connect your HD camcorder to a TV with the
Component/AV (Y/P
B
2 . Set the camcorder's output signal to the TV using
the "Analog TV Out" function. page 89
• If only a mono audio input is available on the TV set, use the white plug (audio L) on the audio cable.
• When the camcorder is connected to a TV with more than one cable, the output signal is followed in the order of
priority: HDMI output  Component output  Video output
• Do not use excessive force when connecting the cables.
• When connecting the Component/AV, make sure to match the color of the cable plugs to the TV jacks. The exception
to this is when following Method 2 above, the Blue plug may not match the Video input on your TV (usually Yellow).
• It is recommended to use the AC power adaptor as the power source.
• When the HD camcorder is connected to a TV, you cannot control the volume of the TV from the camcorder.
50_ English
Normal TV
, Audio L/R) cable.
/P
R
Method 2
HD camcorder
Signal fl ow
Component/AV cable
1 . Connect your HD camcorder to a TV with the 1 . Connect your HD camcorder to a TV with the
Component/AV (Video, Audio L/R) cable.
Use the Blue plug with the yellow label to
connect to the Video input on your TV.
2 . Set the camcorder's output signal to the TV
using the "Analog TV Out" function. page 89
Normal TV