troubleshooting
Symptom
When recording a subject illuminated by
bright light, a vertical line appears.
When the screen is exposed to direct
sunlight during recording, the screen
becomes red or black for an instant.
During recording, the date/time does not
display.
You cannot record a photo image.
The shutter sound is not heard when you
record a photo image.
The beep sound is not heard.
There is a time difference between
the point where you press Recording
start/stop button and the point where the
recorded movie starts/stops.
Explanation/Solution
•
This is not a malfunction.
•
This is not a malfunction.
•
"Date/Time Display" is set to "Off." Set the "Date/Time Display" to On.
page 85
•
Set your HD camcorder to Record mode. page 20
•
Release the lock on the write-protection tab of the memory card if any.
•
The storage media is full. Use a new memory card or format the storage media.
page 82
Or remove unnecessary images. page 100
•
Set "Shutter Sound" to "On."
•
Set "Beep Sound" to "On."
•
Beep sound is temporally off while recording movies.
•
On your camcorder, there may be a slight time delay between the point when you
press Recording start/stop button and the actual point where the recorded movie
starts/stops. This is not an error.
English _125