Samsung AE071MNMPEH Installation Manual page 27

19 Setting SEG23, SEG24 mode
a Press Low Fan button( ) to enter SEG23 value.
b Press High Fan button( ) to enter SEG24 value.
Each time you press the button,
5 After setting option, press
 

6 Press operation button
option twice.
7 Check operation.
a Reset the indoor unit by pressing the RESET button of indoor unit or outdoor unit.
b Take the batteries out of the remote control and insert them again and then press the operation button.
Setting an indoor unit address (MAIN/RMC)
1 Check whether power is supplied or not.
– When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
2 Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system plan.
3 Assign an indoor unit address by wireless remote control.
The initial setting status of indoor unit ADDRESS(MAIN/RMC) is "0A0000-100000-200000-300000".
Option No. : 0AXXXX-1XXXXX-2XXXXX-
3XXXXX
Option SEG1
Explanation PAGE
Indication DetailsI
Indication
and Details
0
Option setting
will be selected in rotation.
button to check whether the option code you input is correct or not.
 
with the direction of remote control for set. For the correct option setting, you must input the
SEG2 SEG3
Mode Setting Main address
Indication Details Indication
0
A
Main address
1
setting mode
SEG23
  
SEG4
100-digit of indoor
unit address
Details Indication Details
No Main
address
0~9 100-digit
Status
SEG24

SEG5 SEG6
The unit digit of an
10-digit of indoor unit
indoor unit
Indication Details Indication
0~9 10-digit 0~9
Details
A unit
digit
27
English