Trouble shooting
Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
LED lights
Defective LED lights may be replaced by the manufacturer, their
after-sales service or a qualified technician (electrician) only.
Malfunction table
Problem
Possible cause Solution
The appliance
The plug is not
does not work
plugged into the
mains
Power cut
The fuse is
faulty
The lighting
The LED lights
does not work.
are defective.
The button illu-
The control unit
mination does
is faulty.
not work.
One of the two
The grease filter
or the activated
buttons or
Þ
charcoal filter is
both
buttons
Þ
saturated.
is/are flashing
on the display
panel
--------
Connect the appliance to
the power supply
Check whether other
kitchen appliances are
working
Check in the fuse box to
make sure that the fuse for
the appliance is in working
order
Call the after-sales service.
Call the aftersales service.
Clean the filter or regener-
ate or replace the activated
charcoal filter; see the
Cleaning and maintenance
section.
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Replacing the batteries in the remote control
Unscrew the screw.
1.
Remove the cover.
2.
Remove the battery.
3.
Insert the new battery (CR2032/3 V) correctly.
4.
Note: Dispose of flat or faulty batteries in accordance with local
regulations.
Note: Do not dispose of batteries along with general household
waste.
9