ICON iKeyboard 4X User Manual page 7

Transport control buttons section

PLAY button - Activate the play function of the DAW.

STOP button - Activate the stop function of the DAW.

REC button - Activate the record function of the DAW.

REWIND button - Activate the rewind function of the DAW.
FAST FORWARD button - Activate the fast forward function of the DAW.



LOOP button - Activate the loop function of the DAW.
Automation section

READ button - Press the READ button to activate the read function of the current audio
track.

WRITE button - Press the WRITE button to activate the write function of the current audio
track.
Other control buttons

Jog button - Activate to use the encoder as a jog wheel.

The jog wheel is used for various purposes specific to the DAW application, including shuttle
and scrubbing functions.
Program button - Use together with the encoder to change the sound bank of your soft-


synth.

(Tip: Please refer to Appendix A for Mackie Control and HUI protocol functions.)
6. Modulation jog wheel

Rotate to adjust the modulation effect.
7. Pitch jog wheel

Rotate to adjust the pitch bend. It returns to default, "0" when released.
8. Octave buttons

Raise or lower the pitches played on your keyboard.
9. Transpose button (Use in conjuction with the Octave up/dwon
buttons)

Raise or lower the pitches (by less than an octave) played on your keyboard.



(Tip: While pressing and holding the "Transpose" button, press a keyswitch within an octave
range from the original c1 position) to change the c1 to that particular switch.)
10. Track </> buttons

Track < Shift "one" channel up for all faders (except the master channel).

Track > Shift "one" channel down for all faders (except the master channel).
11. Bank </> buttons
Bank <

Shift "eight" channels up for all faders (except the master channel).

Bank > Shift "eight" channels down for all faders (except the master channel).
7