Hercules Wae Outdoor Rush Manual

ENGLISH
Line In
9
12
1. On/o button and charge indicator
2. Volume + button
3. Volume – button
4. Play/Pause/Mute button
5. Next button
6. Previous button
7. Bluetooth® button and indicator
8. FM Radio button and indicator
9. Line input connector
10. USB port
11. Micro-USB port
12. Micro-USB to USB cable
1. Charge completely before rst use
Completely charge your WAE Outdoor Rush
speaker before using it for the
Connect the Micro-USB connector on the
Micro-USB to USB cable (12) to the Micro-USB
port (11) on the WAE Outdoor Rush speaker,
and the other end of the cable to the USB port
on a computer or on a smartphone/tablet USB
power adapter (5V/1A)*.
The standard charging time is 3.5 hours.
While charging, the charge indicator (1) ashes
green. When the battery is fully charged, the
charge indicator (1) stops ashing.
When the battery level is low, the charge
indicator (1) ashes.
2. Getting started with your speaker
To power on your WAE Outdoor Rush speaker,
press the on/o button (1). To power o the
speaker, press the on/o
1 ON/OFF
seconds.
When used for the rst time, your WAE Outdoor
2
Rush speaker is ready for pairing: the Bluetooth®
indicator (7) ashes blue.
3
- On your smartphone/tablet, MP3 player or
computer, enable the Bluetooth® wireless
4 Play/Pause
technology function, and search for available
Bluetooth® devices.
5 Next
- Select WAE Outdoor Rush in the list of available
Bluetooth® devices and carry out the pairing (if
6 Previous
an access code is required, enter 0000).
7
Once the devices are paired and connected, the
Bluetooth® indicator (7) stays lit up in blue. You
are now ready to play your music.
8 FM
3. Volume and music controls
The volume + and volume – buttons (2 and 3)
let you control the volume of your WAE Outdoor
Rush speaker, independently of the controls on
your Bluetooth® device (smartphone, tablet,
MP3 player, computer...).
For devices supporting Absolute Volume
(AVRCP 1.4) mode, their volume level is directly
controlled by the WAE Outdoor Rush speaker.
4. Playing music on the WAE
Outdoor Rush from another music
USB Out
source
10
If you want to play music from a di erent
USB In
Bluetooth® music source (smartphone, tablet,
11
lecteur MP3, PC...) than that currently used,
press and hold the Bluetooth® button (7) for 3
seconds until it beeps to disconnect the
connected device. The Bluetooth® indicator (7)
ashes blue to indicate that you can now pair
and connect a new Bluetooth® device.
5. Clearing the saved list of paired
devices
Your WAE Outdoor Rush speaker can save
pairing information for up to 8 devices. A long
press (8 seconds) on the Bluetooth® button (7)
lets you clear the saved list of paired devices.
6. FM radio
Press the FM Radio button (8) to enable the FM
radio function: the FM Radio indicator (8) lights
up in white.
When used for the rst time, an automatic scan
is carried out: the automatic scan will save all
detected stations, and will start playing the rst
station when the scan is complete. You can then
switch between the di erent stations using the
Next (5) and Previous (6) buttons.
Pressing the Play/Pause button (4) enables or
disables the mute mode.
To launch a new scan for stations, press and
hold the FM Radio button (8) for 3 seconds.
During a scan, the indicator (8) ashes white.
You can save up to 40 stations.
Download and check out all the FM
functionalities thanks to the WAE Music app:
display frequencies, stations list...
In the US only: in order to improve the quality of
the FM reception, you need to download and
install the WAE Music app. Once connected to
the WAE Outdoor Rush, from the FM panel, go
to the advanced settings
rst time.
EU/US setting to US.
7. Line input
You can connect your MP3 player directly to
the speaker's line input connector (9).
8. Standby mode
When the WAE Outdoor Rush speaker plays
no music (via the Bluetooth® function or the
FM radio) for 10 minutes or more, it switches
to standby mode in order to save battery
power. You can "wake it up" from standby
mode by pressing the on/o button (1) or
using the WAE Music app.
9. Charging function**
When the Bluetooth® mode is enabled (only in
this mode), you can charge your smartphone
button (1) for 2
by connecting it to the USB port (10).
You can reduce the charging time by turning
o the Bluetooth® function: to do so, press the
Bluetooth® button (7) twice. When your device
is fully charged, press the Bluetooth® button (7)
twice again to enable the function.
Your WAE Outdoor Rush speaker features a
USB port (10), allowing you to charge an
external device (smartphone, MP3 player).
The charging power level provided by the
speaker is 500 mA, allowing you to charge
most smartphones. You cannot use the
speaker to charge a tablet.
10. IP67 protection
Make sure that the protective cap is fully
screwed on, in order to ensure that the
product is water- and dust-tight.
Use the tool attached to the wrist strap to
lock/unlock the protective cap.
* Not included.
** A speci c cable (not included) may be
required.
Download the
WAE Music app
and change the
www.hercules.com