Table of Contents
Advertisement
2.4
Rack Mounting Instructions
This section provides information on installing the HRB001 server into a rack unit with the rails
provided. There are a variety of rack units on the market, which may mean the assembly procedure
will differ slightly.
You should also refer to the installation instructions that came with the rack unit you are
using.
2.4.1
Identifying the Sections of the Rack Rails
The chassis package includes two rack rail assemblies including the required bolts in the rack
mounting kit, as identified below.
Each of the 19" chassis rails (b.) consists of two sections that form the outer fixed rack rail that
secures directly to the rack itself.
2.4.2
Installing the Inner Rail
The inner rail is pre-installed on the server, prior to delivery. This means that no installation steps
are required.
If either of the inner rails is missing please contact your supplier and do not continue with
installing the server.
Figure 2-1: HRB001 server package contents
Figure 2-2: Outer fixed rack rail sections
Page 7 of 12
Advertisement
Table of Contents
