Removing The Hrb001 Server From A Rack - Deep Secure HRB001 Installation Manual


Align chassis rails with the front of the rack rails.

Slide the chassis rails into the rack rails, keeping the pressure even on both sides (It may be
necessary to depress the locking tabs when inserting). When the server has been pushed in
about 1/3 of the length of the rail a click should be heard (the safety catches engaging), push the
server fully in.

Use the supplied rack bolts (a.) to securely attach the server to the front of the rack rail.
2.4.6

Removing the HRB001 Server from a Rack


Before removing the server from the rack ensure that all cables have been removed.

Gently pull the server forward until a firm resistance is felt (around 2/3 of the inner rail length).

Locate the spring releases on either side of the inner rail and depress both.

Gently ease the server forward until the unit is free from the rack.
Figure 2-6: HRB001 server in rack
Page 10 of 12