Samsung HT-BD1250 User Manual page 31

Case 2 : Connecting to a Wireless IP sharer
You can connect to network with a Wireless IP sharer. See page 52 for Wireless Network Setup.
Modem Port
M

This unit is compatible with only Samsung Wireless LAN Adapter. (not supplied)
(Model name: WIS09ABGN).
- The Samsung Wireless LAN Adapter is sold separately.
- Contact a Samsung Electronics agent or service center for purchasing.

You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended
for stable operation of the wireless network.)

Wireless LAN, in its nature, may cause interference, depending on the use condition (AP
performance, distance, obstacle, interference by other radio devices, etc).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

When applying the security key for the AP (wireless IP sharer), only the following is
supported.
1)
Authentication Mode : WEP, WPAPSK, WPA2PSK
2)
Encryption Type : WEP, TKIP, AES
Wireless IP sharer
Modem Cable
Wireless LAN
Adapter
(not supplied)
31