Chapter 3 Basics; Introduction; Switching On/ Rebooting/ Switching Off The Mt90 - Newland MT90 Orca User Manual

Introduction

This chapter provides the basics of setting and using the MT90.

Switching On/ Rebooting/ Switching Off the MT90

After installing the SIM card and battery and having the MT90 fully charged, you may switch the terminal on.
Switch the MT90 on: Hold down the Power key on the right side of the terminal until the terminal vibrates. Note that the
initialization is going to take some time before the MT90 displays the Home screen.
Reboot the MT90: Hold down the Power key on the right side of the terminal until the window below pops up, then tap
"reboot".
Switch the MT90 off: Hold down the Power key on the right side of the terminal until the window below pops up, then tap
"Power off".

Chapter 3 Basics

14