¨
PL-AC56 Kit
1200 Mbps Wi-Fi HomePlug® AV1200 Powerline Adapter Kit
Quick Start Guide
Applicable to PL-AC56 and its multiple-pack kits.
This QSG uses PL-E56P powerline adapter to work with PL-AC56 powerline extender.
PL-AC56 Kit includes:
• PL-AC56
Wireless-AC1200 WiFi PowerLine
• PL-E56P
HomePlug AV 1200Mbps PowerLine Adapter
Plug-n-Play
Setting up your wireless network
NOTE:
Use the same steps to set up more
Wi-Fi powerline devices.
Copyright© ASUSTeK Computer Inc.
E11201_PL-AC56_QSG_Special.indd 1
PL-E56P
Air vents*
Wi-Fi Clone (optional)
Use your router's wireless network name and password to configure your
PL-AC56 settings.
1.
Place your PL-AC56 next
to your router, and turn
both devices on.
2.
Press the WPS button on
your router.
NOTE:
location. If it fails, follow the steps in PL-AC56 Wireless Settings.
First Edition / January 2016
Air vents*
3.
Press the Clone
button on your
PL-AC56.
Your extender blinks
slowly for a few seconds
4.
Your PL-AC56 and your router
now have the same wireless
network name and password.
If Wi-Fi Clone succeeds, move your PL-AC56 to your preferred
NOTE:
Wait until the powerline and
power LEDs turn on.
IMPORTANT!
* Ensure that the air
PL-AC56
vents, which allow air ventilation, are
not blocked.
Have fun!
To connect devices to your PL-AC56 Wi-Fi powerline,
refer to the Wi-Fi information sticker for the default
network name (SSID) and password.
To customize your PL-AC56 network name (SSID)
and password, refer to the section PL-AC56 Wireless
Model No. PL-AC56
Settings.
Your Configuration
Customized Wireless Network Name
Customized Wireless Password
1/12/2016 5:12:07 PM
Need help?
Do you have a question about the PL-E56P and is the answer not in the manual?
Questions and answers