Wiring Connection - auna MVD-470BT Instruction Manual

If necessary, use the strap (6) to secure the back of the
unit in place. The strap (6) can be bent by hand to the
desired angle.
To remove the unit, insert the release keys (2) on both
sides of the unit and then pull out the unit from the
dashboard.
Before detaching the front panel, make sure the
unit is turned off. Press the REL button and pull
of the front panel from the main unit.
Unit rear
26
Front Panel
First, insert the left hand side of the dront panel into
the main unit. Then push the right hand side of the
front panel into the main unit until it locks firmly.

Wiring Connection