Table of Contents
Advertisement
2 RESET button
Resets all of the divider output clocks.
3 MUX1&2 (multiplexer)
[inputs]
Wave shape and pitch modulation.
Each Mux has 4 inputs: A, B, C and INH
(inhibit=mute).
Patching a square wave (divider bit
outputs etc) to any of these inputs will
create changes to the wave shape of the
audio oscillator and sends two diferent
versions of that signal to the left and
right outputs of the headphone jack.
The efect varies from subtle to extreme
depending on the MODE setting.
MUX1
(left)
TIPS
• Wear headphones (!) for a stereo
experience.
• Play with the oscillator pitch and range
settings.
• Plug multiple divisions into the same
input socket.
• If nothing crazy is happening, plug in
more cables.
• Keep plugging in cables!
&TRICKS
• Build the example patch on the left
and patch a bit from the adventure
bits section into the center VCO CV
input socket.
MUX2
(right)
Advertisement
Table of Contents
