Table of Contents
Advertisement
FEATURES
•
O clock oscillator for rhythmical
v
modulation
• VCO oscillator is synced to the HFO
oscillator
• 4 modes of operation selectable
by 2 switches
• built in speaker with volume control
• 9V DC center positive power supply
input
• 9V battery compartment from the
bottom
• <20mA power draw on headphones,
<60mA with speaker
(minimum 20 hours on battery)
• On /Of switch
• expansion connector
• package includes 3 photo resistors –
make your oscillators respond to light
by plugging these into the Bend socket
PATCHBAY
• 118 jumper cable patch points
• each oscillator has 3 diferently slewed
CV inputs, sync inputs, rate knob and
bend points
• Divider Bits section – use clocks at
diferent speed to create patterns
• Adventure Bits section adds irregular
rhythmical elements
• MUX 1 and MUX 2 input sections to
modulate data loops and waveforms
• stereophonic output from MUX 1 and
MUX2 sections
• BYTE CV section is R2R DAC converter
which takes bits and converts them
to CV
RANGER
ABOUT
• DATA modulation section witch a switch
adds more lavor
• Utility Belt section adds advanced
features
• Left and Right audio override section
EXTERNAL
CONNECTIVITY
• 3.5mm stereophonic headphone
output
• Clock Input to sync the LFO oscillator
• Clock Output with selectable LFO
division (2 or 32)
• CV Output from the BYTE DAC section
• CV Input for the VCO
• CV In and CV Out connectors can be
routed to dedicated patch points on
the patchbay
Advertisement
Table of Contents
