Table of Contents
Advertisement
MK-24 SERIES
Check Fuel Level
For all Engine related maintenance and troubleshooting refer to the Engine Manual.
1. Gasoline is highly flammable and explosive. You can be burned or seriously
WARNING
2. To fuel, stop engine if running and allow it to cool.
3. Refuel in a well-ventilated area.
4. Keep gasoline away from appliance pilot lights, barbeques, electric appliances,
5. Wipe up spills immediately.
1. Fuel can damage paint and plastic. Be careful not to spill fuel when filling the
NOTE:
2. DO NOT use stale or contaminated gasoline or an oil/gasoline mixture.
(A)
Remove the Fuel Cap. Refer to
Engine Manual for details.
Engine Maintenance
Engine maintenance and adjustment is necessary to keep the saw in good operation condition. Main-
tenance operations include oil changes, filter changes, air cleaner, spark plug, fuel filter etc...Perform
all maintenance procedures as recommended by the Honda, Vanguard or Kohler engine manual
provided separately.
(A)
Remove the Diamond Blade.
injured when handling fuel.
power tools, etc.
fuel tank. Damage caused by spilled fuel IS NOT covered under the warranty.
Ensure fuel level is 1" below the
throat of the Fuel Tank.
Lower the MK-24 Series to
its lowest position.
1 inch (25mm)
from throat
Maximum
Fuel Level
(B)
(B)
30
MAINTENANCE
(C)
Free the Oil Drain Line.
Place a catch basin below the
Oil Drain Line. Remove the Drain
Cap to drain oil completely. Refer
to Engine Manual for details.
Advertisement
Table of Contents
