Add Content To A Lesson; Figure 28: Teacher - Add Content To Lesson With Drag-And-Drop - Intel Education Content Access Point User Manual

Content and Lesson Management (Teacher Guide)
4.3.2

Add content to a lesson

There are two ways to add content to a lesson.
Method #1:
a. Go to the Lessons (
b. Click the plus (
empty box on the left side.
c. Click either the Preloaded Content tab or the My Uploaded Content tab.
d. Drag and drop each content item into the lesson box.
Figure 28: Teacher - Add content to lesson with drag-and-drop
Method #2:
a. Go to the Library (
b. Click either the Preloaded Content tab or the My Uploaded Content tab.
c. Checkmark the desired content.
d. Click Add to Lesson and a dropdown list of lessons will appear.
e. Select the lesson name.
f. Click the checkmark (
January 2015
Document Number: 331819-001EN
) page. (See Figure 28.)
) button under the lesson. The lesson name will show up in the Library page with an
) page. (See Figure 29.)
) button to add.
Intel® Education Content Access Point
User Manual
27