Sony CFS-1058S Operating Instructions

Setting up the system

Connecting the Speakers
Make sure you turn off the power before making connections.
b
a
2
R
A K E
S P E
L E
H T
R IG
1
Align the grooves and slide the speaker box
down until it snaps into place a.
2
Connect the black wires to (–) minus and the red
wires to (+) plus terminals: the right speaker
wires to the RIGHT, and the left speaker wires to
the LEFT terminals.
Tip
To detach the speakers, unlock the speaker b and slide the
speaker box all the way up and away from the player.
Choosing Power Sources
To use the player on AC power source (mains)
Connect the supplied AC power cord to the AC IN jack.
1
2
to AC IN
to a wall outlet
To use the player on batteries
Insert six R20 (size D) batteries (not supplied) into the battery
compartment.
To adjust the voltage
Be sure to set the VOLTAGE
VOLTAGE
SELECTOR(at the rear) to your local
SELECTOR
power supply.
220 – 240V
110 – 120V
Notes
• To use the player on batteries, disconnect the mains lead from
the player.
• Replace the batteries when the OPR/BATT indicator dims or
when the player stops operating. Replace all batteries with new
ones.
1
Connecting optional
components
Before making connections, be sure to turn off the power of
the component and set FUNCTION to TAPE/RADIO OFF on
the player.
F T
to CD/TV LINE IN
CD/TV
L LINE IN R
L (white)
Audio Connecting cord
RK-C520HG (not supplied)
After connecting the component, set FUNCTION to CD/TV
LINE IN and play the connected component.
Tip
You can record sound from the connected component. Insert a
cassette, and press r.
Note
Connect the cables firmly to avoid any malfunction.
Using the microphone
Turn on the microphone if it has a power switch.
MIX
MIC
Tips
• To mix radio or tape sounds and your voice, play the sound you
want, and speak or sing into the microphone. To record mixed
sounds, insert a cassette, and press r.
• To record through a microphone, set FUNCTION to TAPE/
RADIO OFF, and start recording.
• To use the player as a public address system, set FUNCTION to
TAPE/RADIO OFF, eject the cassette, and then press (.
Note
If acoustic feedback (howling) occurs, turn down the volume or
move the microphone away from the speakers.
Radio
Cassette-
Corder
Operating Instructions
CFS-1058
CFS-1058S
©1996 by Sony Corporation
R (red)
Printed in Bangladesh
3-858-469-31(1)

Troubleshooting

There is no audio.
• Connect the mains lead
securely.
• Insert the batteries properly.
• Replace all batteries if they are
weak.
• Unplug the headphones.
• Adjust the volume.
• Set FUNCTION to the position
you want to operate.
Cassette cannot be
inserted.
• Insert the cassette properly.
The r button does not
function.
• No cassette is in the tape
compartment.
• Make sure the safety tab on the
cassette is in place.
Poor playback,
recording or erasing
quality.
• Dirty heads. Clean the unit (as
shown) with a cotton swab
slightly moistened with
cleaning fluid or alcohol.
• Demagnetize the heads and all
metal parts in the tape path
with a commercially available
tape head demagnetizer.
On placement/operation
WARNING
• Do not leave the player in a
location near heat sources, or in a
To prevent fire or shock hazard,
place subject to direct sunlight,
do not expose the player to rain excessive dust or mechanical
shock.
or moisture.
• Do not place anything within 10
To avoid electrical shock, do not
mm of the side of the cabinet. The
open the cabinet. Refer servicing
ventilation holes must be
to qualified personnel only.
unobstructed for the player to
operate properly and to prolong
the life of its components.
Precautions
• Since a strong magnet is used for
the speakers, keep personal credit
On safety/power sources
cards using magnetic coding or
spring-wound watches away from
• Should any solid object or liquid
the player to prevent possible
fall into the player, unplug the
damage from the magnet.
player, and have it checked by
• If the player has not been used for
qualified personnel before
a long time, set it in the playback
operating it any further.
mode to warm it up for a few
• For AC operation, check that the
minutes before inserting a cassette.
player's operating voltage is
identical with your local power
If you have questions or problems
supply (see "Specifications") and
concerning your player, please
use the supplied mains lead; do
consult your nearest Sony dealer.
not use any other type. The
voltage selector is located on the
rear of the player.
• The player is not disconnected
from the AC power source
(mains) as long as it is connected
to the wall outlet, even if the
player itself has been turned off.
• For battery operation, use six R20
(size D) batteries.
• When the batteries are not to be
used, remove them to avoid
damage that can be caused by
battery leakage or corrosion.
• The nameplate indicating
operating voltage, power
consumption, etc. is located at the
rear.

Specifications

• Frequency range
CFS-1058
FM: 87.6–108MHz
Erase head
AM: 530–1,710kHz
Capstan CFS-1058S
FM: 87.6–108MHz
MW: 530–1,605kHz/SW1: 2.3–
7MHz/SW2: 7–22MHz
• IF FM: 10.7MHz/AM/MW/SW:
455kHz
• Aerials FM/SW: Telescope/AM/
Record/
MW: Built-in ferrite bar
Playback
Pinch roller • Recording system 4-track, 2-
head channel stereo
Cotton swab • Frequency response 100–10,000Hz
• Speakers Woofer: 10cm (4 inches)
dia. , cone type/Tweeter: 2 cm (
inches) dia.
• Input CD/TV LINE IN
jacks(phono jacks), sensitivity
0.3 V, input impedance 47 kilohms
Mixing microphone input jack
(mini jack), sensitivity 3 mV. for
low impedance microphone
• Output Headphones jack (stereo
minijack), for 16–68 ohms
impedance headphones
• Maximum Power output
2.3W+2.3W
• Battery life
FM Recording: Sony R20P: Approx.
16 hours/Sony LR20 alkaline:
Approx. 36 hours
Playback: Sony R20P: Approx. 8
hours/Sony LR20 alkaline:
Approx. 21 hours
• Power requirements
110–120V/220–240 V AC
selectable, 50/60Hz
9V DC, six R20 (size D) batteries
• Power consumption
AC 14W
• Dimensions Approx. 579 x 206 x
7 1
197 mm (w/h/d) ( 22 / x 8 / x
8 8
7 7 / inches) incl. projecting parts
8
and controls, not incl. handle
• Mass Approx. 4.6kg (10 lb 2 oz)
incl. batteries
• Supplied accessory AC power
cord (1), Vietnam model only:
Microphone (1)
Design and specifications are
4 /
5 subject to change without notice.