Sharp 8M-B70AU Setup Manual page 21

Introduction
Initial Installation
Perform the following steps before you
press POWER on the remote control unit.
1
Insert the batteries into the remote
control unit.
2
Plug in the AC cord to the AC outlet.
Easy Setup
Press a//c/d to select the
1
desired language listed on the screen,
and then press ENTER.
Press c/d to select "HOME" or
2
"STORE" , and then press ENTER.
EN 6
Viewing the Built-in Operation Manual
Viewing the Built-in Operation Manual
Press MANUAL on the remote control unit to display operation information on the screen.
To search for an item from the table of contents, and to search for a particular term and to fi nd troubleshooting
information, press MANUAL while watching the Monitor and then select the applicable item from the manual
cover page that appears.
1
Press MANUAL while watching the Monitor.
This displays the built-in operation manual screen.
2
When you select contents, its page will be displayed.
3
You can turn over the page one by one for these arrow marks.
2
1
NOTE
• You can also display the built-in operation manual by selecting "Information" > "Manual" from the menu screen.
3
ETHE RNET
termi nal
PC IN AUDI O IN
termi nal
termi nal (shar ed for
PC IN and
HDM I IN 2)
*2
VIDEO IN
1 termi nals
AUDI O OUT
termi nals
COMP ONEN
T/
VIDEO IN
termi nals *5
HDM I IN 2
HDM I IN 1
termi nal
termi nal
ARC: Audio
Retur n Chan
nel *3
DIGIT AL AUDI
O OUT
termi nal