Remote control
Timer
Sets the timer on/off.
(See pages 16~17 for instructions.)
Good Sleep
Sets the Good Sleep mode on/off.
(See page 18 for instructions.)
Mode
Sets the Fan/Cool/Dry mode.
(See pages 12~14 for instructions.)
E.Saver
Sets the E.Saver mode.
(See page 19 for instructions.)
Installing the batteries
1. Slide the cover on the
rear of the remote
control down to open.
2. Install two AAA
batteries.
Check and match the "+"
and "-" signs accordingly.
Make sure you have
installed the batteries in
correct position.
Temp
Increases/decreases the
temperature.
Fan
Adjusts the fan speed.
Power
Turns on/off the air conditioner.
3. Close the cover by
sliding it back to its
original position.
You should hear a click
when the cover is locked
properly.
setting up _11