There are three pre-defined levels to set the lux level threshold at which
the photocell turns the illuminator on or offn Select the required sensitivity
level by using the buttons belown
1
2
3
4
Telemetry Input
The telemetry input wires (orange and purple) are designed to be used
with a remote switch or input from an alarm system, PIR detector, control
room, video management system or camera outputn The input signal can
be volt-free or TTLn
Photocell disabled
5 Lux On, 15 Lux Off
10 Lux On, 30 Lux Off
25 Lux On, 50 Lux Off
23
AXIS T90B Series