Operational Anomalies - DeLonghi EO241250 User Manual

OPERATIONAL ANOMALIES

ERROR
MESSAGES ON DESCRIPTION
THE DISPLAY
E0:11 Temperature probe
Err malfunction
E0:12 Temperature probe
Err malfunction
Set temperature
has not been
reached
E0:21
The oven was not
Err
able to reach the
set temperature
in a reasonable
amount of time
Overheating
E0:22 The oven
Err temperature is too
high.
Unexpected
heating
The temperature
E0:27 probe detected
Err a temperature
increase even
though the heating
elements were off.
POSSIBLE
PROBLEM
Write down the error number.
The electronic
controller has Reset the controller by pressing the on/stand-by butto n
detected a (N) for 2 seconds and unplug. The temperature probe may be
temperature probe damaged. Contact an authorized DeLonghi service centre and
malfunction give them the error number.
Write down the error number.
The electronic
control has Reset the controller by pressing the on/stand-by button
detected a (N) for 2 seconds and unplug. The temperature probe may be
temperature probe damaged. Contact and authorized DeLonghi service centre and
malfunction give them the error number.
Write down the error number.
Reset the controller by pressing the on/stand-by button
The electronic
for 2 seconds and unplug. First, make sure that the oven door
controller detected
was closed properly during operation.
an excessive
If the door is kept open during operation, the oven cannot
amount of time
reach the set temperature.
to reach the set
If, however, the door was closed properly, the heating
temperature inside
elements may be damaged.
the oven chamber.
Contact an authorized DeLonghi service centre and give them
the error number.
Write down the error number.
The electronic
Reset the controller by pressing the on/stand-by button
controller detected
for 2 seconds and unplug. The electronic controller on the oven
an overly high
may be damaged.
temperature inside
Contact an authorized DeLonghi service centre and give them
the oven chamber.
the error number.
Write down the error number.
The electronic
Reset the controller by pressing the on/stand-by button
controller detected
for 2 seconds and unplug.
Unexpected
This error can occur if the DEFROST function was started while
heating inside the
the oven was still hot from a previous use. Make sure the oven
chamber while the
is completely cool before starting the DEFROST function. If the
heating elements
DEFROST function was not used, the electronic controller could
were off.
be damaged. Contact an authorized DeLonghi service centre
and give them the error number.
13
SOLUTION
(N)
(N)
(N)