Pty; Switching The Dab Information Display - Denon TU-1800DAB Operating Instructions Manual

PTY

The "S. Component" is sorted in the order of the programme
Type.
1
Press the
2
Either turn the
press the
display the sort mode selection screen.
3
Press the
button to set the sort mode.
4
Either turn the
CHANNEL/CONTROL
press the
"Sort Mode (PTY)".
5
Press the
button to set the sort mode to "Sort Mode
(PTY)".
You can select any component from the sorted list.
Downloaded from www.Manualslib.com
MENU
button to select menu.
TUNING/PRESET
CHANNEL/CONTROL
TUNING/PRESET
knob or
TUNING/PRESET
button to select
TUNING/PRESET
knob or
manuals search engine

Switching the DAB information display

Follow steps 1 to 4 under "Tuning in DAB
1
(Digital Audio Broadcasting) broadcasts"
(
2
Press the
reception information.
knob or
The display switches as shown below each time the
button to
DISPLAY button is pressed.
q DLS (Dynamic Label Segment) :
ENTER
knob or
w Ensemble Name :
e PTY (Programme Type) :
ENTER
r Channel and Frequency :
t Audio Information :
y Time and Date :
u Bit Error Rate :
23
page 19) to tune in a DAB station.
DISPLAY
button to switch the DAB
The text data included in the broadcast scrolls.
The ensemble name is displayed.
The category of the broadcast being received
is displayed.
The frequency is displayed.
The bit rate and mode of the broadcast being
received is displayed.
The current time and date are displayed.
Noise may be generated and reception quality
may become poor at bit error rates above
0.05. If a rate above 0.05 is displayed, move
the antenna in different directions to find a
position where the rate displayed is less 0.05.
Operation