Acer Altos R720 Series User Manual page 90

80
Caution! Use extreme care when removing DIMMs. Too much
pressure can damage the connector. Apply only enough pressure
on the plastic levers to release the DIMM.
1 Observe the ESD precautions and pre-installation instructions
described on page 35.
2 Press the holding clips on both sides of the DIMM slot outward to
release the DIMM (A).
3 Gently pull the DIMM upward to remove it from the DIMM slot
(B).
4 Observe the post-installation instructions described on page 36.
To reconfigure the system memory:
The system automatically detects the amount of memory installed. Run
the BIOS setup to view the new value for total system memory and
make a note of it.
3 System upgrade