Atid AT870N Manual For Customer

Handheld uhf rfid reader
Hide thumbs Also See for AT870N:

Advertisement

AT870N
Guide for Customer

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AT870N and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Atid AT870N

  • Page 1 AT870N Guide for Customer...
  • Page 2 ATID is a registered trademark of ATID CO.LTD. AT870N is a registered trademark of ATID CO.LTD. and of its wholly owned subsidiaries. Microsoft Windows®, Windows® 2000, Windows® CE .NET, Windows® NT, and Windows® XP are registered trademarks of Microsoft Corporation.
  • Page 3: Table Of Contents

    Contents Page Contents Before using manual for AT870N Chapter 1. Caution when using AT870N 1. How to use battery correctly 2. Caution when using AT870N Chapter 2. Product composition 1. Product composition 2. Name of each part 3. Function of each part Chapter 3.
  • Page 4 Page Contents Chapter 3. Basic function(continues) 17. Using keypad 18. Inputting Data 19. Using <Fun> Button 20. Use of stylus 21. Connecting PDA to PC 22. Data transfer 23. Firmware upgrading Chapter 4. Optional module 1. Using 1D or 2D barcode scanner 2.
  • Page 5: Before Using Manual For At870N

    Before using manual for AT870N User guide inclusive of text, images, logos, product names is either the property of, or used with permission by ATID CO.,LTD. The information may not be distributed, tten permission of ATID CO.,LTD en user guide and actual function of device User guide can be adjusted by ATID CO.,LTD without consent of user discretionally.
  • Page 6: Chapter 1. Caution When Using At870N

    Caution when using AT870N Please aware of the manual contents in advance before you handle and operate your AT870N and other ATID Products. How to use battery correctly In case that you dropped the main body or battery in water, please do not put into the stove or heater for drying. Just keep it in natural drying or contact purchase •...
  • Page 7: Chapter 2. Product Composition

    Product Composition AT870N is based upon Microsoft window CE 5.0 and as the state of the art product. it is equipped with barcode scanner, RFID Tag reader, MSR card reader, printer, smart card reader, MODEM, Camera and so on and it can be applied to Industry, Enterprise, Product composition 4.
  • Page 8: Name Of Each Part

    Name of each part 1D/2D Scanner Camera (option) Cradle connector (option) Camera ash Earphone jack Charger jack (option) Sync Cable Connector WLAN LED Hand strap hole Phone receiver Internal HF (option) Charge LED UHF Connecting port Scan button (F7,F8) Volume button Touch Screen Battery Keypad...
  • Page 9: Function Of Each Part

    Function of each part NAME FUNCTION Camera (option) It is possible to image capture and save. 1D/2D Scanner (option) Laser beam emitted through this window. Please be careful the foreign substances and preventing from the damage. Warning! Do not look at the laser beam directly. Earphone jack Enable you to connect to earphone.
  • Page 10: Chapter 3. Basic Function

    Basic Function Battery for AT870N is composed of main battery and backup battery. A main battery supplies the power to the system and RAM which could keep the data. A backup battery could keep the data of RAM when the main battery discharged completely.
  • Page 11: Attaching And Detaching The Battery

    Attaching and Detaching the battery ▶ Battery detachment Below images are shown the bottom of device Please slide the battery latch to the right (Direction to UNLOCK), and then lift the main battery to detach the main battery after grapping the laver at the bottom. Battery Latch Both Side of the Gap ▶...
  • Page 12: Charging Battery

    Charging battery You have to charge it through dedicated adapter which is provided when you bought Red light is lit on LED when it starts charging. It will be changed with green light in case of full ▶ Connecting Adapter 1.
  • Page 13 ▶ 1. If you push the <POWER> button for 2 ~3 seconds in the state of running on the screen, Power On: 2. The system will be automatically turned on when ActiveSync USB cable is connected with device. Power Button ◆...
  • Page 14: Checking Battery Gauge

    ▶ Battery Discharging The system is automatically going to enter the low-power mode (Sleep Mode), if the system is not available due to dead battery. In this situation, the system cannot be turned on despite of pushing <POWER> button If the system enters low-power mode (Sleep mode) due to dead battery, user is able to turn on the device by pushing <POWER>...
  • Page 15: Backup Battery

    ▶ Low Power Warning If the system is unavailable for low-battery, caution screen for lack of battery will be came out. Backup Battery Back-up battery can be used for protecting the RAM data in case of discharging the main battery ◆...
  • Page 16: Soft Reset

    Please do restart the system when the application doesn`t work properly or system receives no Response Soft Reset When do you need to perform Soft Reset? There is a Hang-up, which means that the system receives no response in case of running the program. When user encounters Hang-up, please do reset the system for recovering the device.
  • Page 17: Initializing System

    Initializing System Please use [Boot Menu] when user encounters below situation 1. When user wants to recover the adjusted registry information back again. 2. When user wants to initialize the storage space inside the “My Computer” 3. When user wants to initialize the storage space inside the “Flash Disk” 4.
  • Page 18 [Boot Menu] [Boot Menu] [Clean System] [System Information] [Firmware Upgrade] Clean Registry Clean OS Root [Clean System] Clean Flash Disk Factory Reset [Con guration Setting] Move : 2(Up)/8(Down) [Exit Boot Menu] Preview : <- BKS Move : 2(Up)/8(Down) Select : Enter Select : Enter Select the clause >...
  • Page 19: Attaching Micro Sd Card

    Below image shows the back side of device when separating the main battery from device There are 1EA SIM Card Slot and 1EA Micro SD Card Slot. Micro SD card slot SIM card slot Attaching Micro SD card Do unlock the Micro SD Lift the slot cover up Put the SD memory on the Do lock the slot cover by...
  • Page 20: Attaching Sim Card

    Attaching SIM Card Below image shows the state of equipping the SIM CARD with device. Please do insert it in accordance with card shape and edge shape Chapter 3. Basic Function...
  • Page 21: Screen Brightness Setting

    Screen brightness setting The default setting on brightness is set up around 80% and user is able to set brightness up in accordance with his/her need since the power can be in uenced by brightness [Setting the screen brightness] 1. [Start Button] -> [Setting] -> [Control Panel] -> [Backlight] 2.
  • Page 22: Volume And Sounds Setting

    Volume and sounds setting The default setting on sound is set up around 80% and user is able to set sound up in the section of “Control Panel->Volume & Sound” Setting Volume and Sounds [Start Button] –> [Setting] -> [Control Panel] -> [Volume and Sounds] Data and time setting [Start Button] ->...
  • Page 23 Setting Month: Setting Day: Please select the month Please select the relevant month either using rudder or clicking the month directly Setting Time: Setting Time Zone: Please click the time and then, If you select the exact time-zone, adjust by using rudder user easily can adjust the time setting by selecting the time-zone on regional movement from the next time.
  • Page 24: Using Keypad

    User easily inputs the number and alphabet by using keypad which is useful input method editor. It also can do a programmed function in combination with <Fun> Using keypad Please press the <1<=>ALP> button as below step, if user wants to change the input language It will be converted in the order of [Number] ->...
  • Page 25: Using Button

    Using <Fun> Button Device can implement the programmed function in case that you push the number button with <Fun> button simultaneously. Fun + button Function description <Esc> It is able to cancel the selected command and movement & state of program. Left side of <↑>, <↓>...
  • Page 26: Connecting Pda To Pc

    User can work in concert with computer and device by using ActiveSync through the synchronization of data one another such as installation, copy, Delete, Movement and so on. Connecting PDA to PC Please install the program at the PC after downloading the latest version of Microsoft Windows CE. ActiveSync : Windows XP Windows Mobile Device Center 6.1 (64bit) : Windows XP or above Link for Download : http://www.microsoft.com/downloads/.
  • Page 27 Click the Installation button ActiveSync are installing Press End button for termination of installation Chapter 3. Basic Function...
  • Page 28: Data Transfer

    Data transfer Please connect the USB sink cable with PC Connected State Disconnected State User can check the connection state of ActivSync on the task bar < Windows XP > Start button/Programs/Microsoft ActiveSync After ActiveSync connected, click Explore button. Designate transmitting le path. Transmitting les.
  • Page 29: Firmware Upgrading

    Firmware upgrading Please click the rmware update icon at the control panel if you want to upgrade the rmware of AT870N [Start Button] -> [Setting] -> [Control Panel] -> [Firmware Upgrade] Chapter 3. Basic Function...
  • Page 30: Chapter 4. Optional Module

    Optional module This chapter shows various option module which can be equipped in AT870N. Please refer to the explanation of optional module. Various optional modules for AT870N 1) Barcode reader -. 1D Laser Barcode Scanner -. 2D Imager Barcode Scanner 2) Wireless LAN –...
  • Page 31: Using 1D Or 2D Barcode Scanner

    AT870N can be equipped with 1D & 2D barcode scanner Using 1D or 2D barcode scanner Start->Program->Scanner-> Device can read the barcode by clicking Barcodedemo the Start button or scanner button located on front of device or left/right side of device Chapter 4.
  • Page 32: Barcode Emulator Setting

    Barcode emulator setting User can input the barcode value at the cursor by setting the scan sound, button, input method of barcode value through barcode emulator. Executing Barcode Emulator [Start Button] -> [Programs] -> [Demo Apps] -> [Scanner] -> [BarcodeEmulator] Run a Barcode Emulator rst Barcode Emulator can be shown up at the task bar...
  • Page 33 Setting the termination code for barcode value Setting the Key for barcode reading Terminator Key Setup None : Not input the termination code F1-F8 : Run with Hardware key CRLF : Carriage Return & Line Feed input method Gun1, Gun2: Run with Gun (Enter code) Tab : Tab key input method Sound : Sound On/O after scanning the barcode...
  • Page 34: Barcode Symbology Setting

    Barcode symbology setting User can set various barcode using provided program and work more comfortably by distributing the symbology as frequent use and infrequent use. For example, user continuously can work if symbology uses most often is set just one time. [Start Button] ->...
  • Page 35 2D Symbology Selection: 1D Symbology selection: 1. Initialization of all barcode setting 1. Initialization of all barcode setting 2. Setting all barcode not to read 2. Setting all barcode not to read 3. Setting all barcode to read 3. Setting all barcode to read 4.
  • Page 36: Barcode Scanning

    Barcode scanning 1. Please eliminate the protect lm in front of scanner at the rst. 2. Please run a barcode demo program 3. Please use the scan bean to center of barcode • Please adjust the range in accordance with barcode size •...
  • Page 37: Wlan Connection And Termination

    AT870N enable to explain wireless communication including APN since it can communicate through 802.11 a/b/g/n radio. AT870N supports the TCP/IP network protocol and AT870N directly uses the TCP/IP and host computer at this protocol Device will be started as OFF state at the beginning WLAN connection and termination [Start Button] ->...
  • Page 38 Click Status button and then, Click Start->Program->ATID App check signal quality and IP information. ->Wireless Lan OK button and terminate the wireless lan ◆ Warning! LED for Wireless LAN will be changed as green light and mark for task bar will be changed as...
  • Page 39: Bluetooth Connection And Termination

    Bluetooth connection and termination User can only control the Power ON/OFF of Bluetooth module since AT870N basically uses stack at the windows system [WinCE Start] -> [Programs] -> [Demo Apps] -> [Bluetooth] 1. Start Bluetooth function Execute “BT Manager” at the start menu...
  • Page 40 [WinCE Start] -> [Programs] -> [Demo Apps] -> [Bluetooth] 1. End Bluetooth function It will be terminated if you press the X button on the screen Chapter 4. Optional module...
  • Page 41: Bixolon Spp-R200 Printer Demo

    Bixolon SPP-R200 Printer Demo with homepage contents according to the Bixolon policy. 1. Download “SPP-R200 Windows SDK” from the Bixolon homepage (www.bixolon.com 2. Bluetooth Power-On 3. Execute “Bluetooth Device Properties” programs at the Control Panel. 4. SPP-R200 printer power ON. 5.
  • Page 42: Gps Demo Program Execution

    GPS can be selected as optional and it will be equipped on AT870N as built-in COM6 has been set as Baud – 9600 GPS demo program execution [Start Button] -> [Program] -> [DEMO Apps] ->[GPS-Demo] Execute GPSDemo Program. Con rm GPS receiving Data: 1.
  • Page 43: Use Of Camera

    AT870N enables to equips with 3.0-megapixel camera which has function to adjust the brightness, video solution and screen capture. Use of camera [Start Button] -> [Program] -> [DEMO Apps] -> [CameraDemo] Execute Camera Program. Camera’s Main Screen. Preview Window Brightness Bar...
  • Page 44: Hf13.56 Demo Program Execution

    AT870N enables to equip with HF13.56Mhz module as a option, and the recognition range is 3-8.5cm according to the standard of ISO, in the case of Mifare Tag, its range will be 1~3.5cm. HF13.56 demo program execution [Start Button] -> [Program] -> [DEMO Apps] -> [RF13.56Demo]...
  • Page 45: Iso15693 Tag Recognition

    ISO 15693 Tag AT870N enables to equip with UHF 900Mhz Tag Reader and this reader enables to read and write RFID Tag which supports protocol of GEN2, ISO/IEC 18000-6C. The Frequency range is CE 865 ~ 868MHz, FCC 902 ~ 928MHz and it could be adjusted in accordance with country UHF Reader Chapter 4.
  • Page 46: Uhf 900Mhz Program

    UHF 900Mhz Program [Start button] -> [Program] -> [DEMO Apps] -> [RF900Demo] RF900Demo Program INVENTORY Mode: Start: click Start button to read the tag Clear : delete all tag values on the screen Chapter 4. Optional module...
  • Page 47: Modem On/Off

    Modem ON/OFF Click Start->Demo Apps -> Press <Power Up> button, wait Press Settings button for setting the Press connect button after setting ModemTest tillpowerup succeed. country and mobile service company the country and mobile service after ready state (If user is not able to company for use of modem nd the country and mobile service company at the setting screen,...
  • Page 48: Chapter 5. Appendix

    Appendix PHYSICAL CHARACTERISTICS Dimension(L*W*H) 76 X 148 X 24.8(30.5) mm Weight 320g (PDA only, without Battery) Operating Temp. -10℃ ~ 40℃ Storage Temp. -10℃ ~ 40℃ Humidity 95% Non-condensing Drop 1.5m Drop to concrete PERFORMANCE CHARACTERISTICS Processor Marvell PXA320 806MHz Operating System Windows CE 5.0 Memory...
  • Page 49 NETWORK CHARACTERISTICS Radio MODEM 3G (GSM / GPRS / HSDPA / HSPA+) WLAN IEEE 802.11 b/g/a compliant Antenna Internal LAN & WAN DATA CAPTURE DEVICE Scanner 1D Laser, 2D Imager Barcode Scanner Camera 3.0 Megapixel Auto Focus with Flash UHF 900MHZ TAG READER Frequency 865.7MHz- 867.5Mhz(Adjustable) Reading Range...

Table of Contents