Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for ionmax Breeze ION420
Summary of Contents for ionmax Breeze ION420
-
Page 2: Table Of Contents
DEAR CUSTOMER Thank you for purchasing the Ionmax Breeze ION420 Air Purifier. The Ionmax Breeze can help to improve the indoor air quality in your home or office. Please read this manual carefully before use to ensure proper usage and save these instructions for future reference. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS PLEASE READ ALL THE TIPS AND WARNINGS BELOW BEFORE USING THE AIR PURIFIER. ● Use only as directed in the User Manual. ● Do not allow children or persons with reduced physical, sensory, or mental capabilities to operate the unit without adult supervision. ●... -
Page 4: Product Diagram
PRODUCT DIAGRAM SPECIFICATIONS Model Ionmax ION420 Voltage 220-240V, 50Hz Power Rating Coverage Area Up to 35 m Germs Killed Noise Level Low: 30dB, Medium: 40dB, High: 50dB Air Flow Low: 65m /h; Medium: 183m /h; High: 236m UV Life ≥10,000 Hours... -
Page 5: Purification System
PURIFICATION SYSTEM Clean Polluted Ionised 3-in-1 Filter The Pre-Filter, HEPA Filter and Activated Carbon Filter are combined into one easy-to-change filter. Cleanable Pre-Filter Traps large particles such as human hair, pet dander and dust particles. Helps to extend the life of the HEPA and Activated Carbon filters. Activated Carbon Filter Neutralises odours and other Volatile Organic Compounds (VOC’s) such as formaldehyde and benzene, as well as other harmful fumes emitted by... -
Page 6: Control Panel
CONTROL PANEL “POWER / UV-C” BUTTON Press this button to turn on or switch off the unit. The UV-C light and Ion generator are also controlled by this button. Note: Ion generator is controlled by the same settings as the UV-C light. “FAN SPEED”... -
Page 7: Operating Instructions
OPERATING INSTRUCTIONS USING THE APPLIANCE Power / UV-C button Press this button to turn the unit on or off. The Negative Ion generator automatically starts up and shuts down at the same time as the UV-C light. Fan speed button Press this button one or more times to select the desired fan speed. -
Page 8: Maintenance Instructions
MAINTENANCE INSTRUCTIONS CLEANING THE UNIT ● Always unplug the power supply before cleaning the unit. ● Do not put the unit into water or use water to wash it directly. ● Do not use any corrosive or flammable detergent to clean the unit. ●... -
Page 9: Filter Replacement
FILTER REPLACEMENT FILTER REPLACEMENT INDICATOR When the “Power” indicator flashes during operation, it indicates that the HEPA and Activated Carbon filters need to be replaced. REPLACING THE FILTERS Follow the Filter Replacement Instructions (page 8) to change the filters. After replacing the filters, with the power off, press and hold the power button for 5 seconds to reset the indicator light. - Page 10 FILTER REPLACEMENT INSTRUCTIONS The ION420 comes with the filters fitted inside, but you may need to remove plastic packaging from the filters before the first use of the air purifier. When replacing with new filters, remove all packaging and place filters into the unit as described below.
- Page 11 Step 5. Place the new Activated Carbon and HEPA filters into the unit, with the HEPA filter facing in and the black Activated Carbon filter facing out. Make sure that the side with the tabs is facing you. Step 6. Place the new pre-filter into the unit.
-
Page 12: Troubleshooting Guide
TROUBLESHOOTING GUIDE Problem Probable Cause Solution Power cable not plugged in Plug in power cable Power cable not plugged in Plug in power cable Unit not properly correctly operating Front cover not attached Reattach the front cover properly Filters not unpacked Unpack the filter packaging (see Filter Replacement Instructions) -
Page 13: Warranty Details
WARRANTY DETAILS Congratulations on your purchase! It is our aim to provide you with quality products that you can trust. Our products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or a refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. -
Page 15: Warranty Registration
WARRANTY REGISTRATION Register your Ionmax Breeze Ion420 online at my.andatech.com.au or fill out this form and forward to the address below with a copy of your proof of purchase. Contact us on 1300 800 200 or visit www.andatech.com.au for options to extend your warranty. - Page 16 1300 800 200 Version 1.2. Updated 2.10.2017...
Need help?
Do you have a question about the Breeze ION420 and is the answer not in the manual?
Questions and answers