Driver & Download; Mixer Mode; About; Cubase & Reason - Nektar Panorama P1 User Manual

DRIVER & DOWNLOAD
About the Panorama Driver
The Panorama driver is required to use our dedicated communication protocol DAW's such as Cubase
and Reason. If the program you want to use is not already installed on your computer, we recommend
you install the program first and our driver second.
If you don't own Reason, you can try a demo of the full version by visiting Propellerhead Software's
website: http://www.propellerheads.se/download/
Once installed, you can run the program in demo mode and see for yourself how well Reason and
Panorama interact.
Note: Panorama's dedicated communication protocol is compatible with Record 1.5, Reason 5, Reason 6,
6.5 and up. Older versions are not supported.
Downloading the Reason Driver
The Reason driver for Panorama can be downloaded from http://www.nektartech.com/registration
Follow the online instructions to register, download and install the Panorama driver and update the
firmware of your unit.
12
Nektar Panorama P1: User Guide
REASON: SETUP
With Reason and the Panorama driver installed, connect the Panorama keyboard to your computer via
USB and set its power switch to On. Wait until the OS has recognized Panorama, then follow these steps:



Once complete Reason should have found two control surfaces: Nektar Panorama and Nektar Panorama

Mixer Mode.

Note: If you are installing Reason for the first time, Reason will request permission to search
automatically for a Master Keyboard. If you do this, Reason will find only Nektar Panorama because our
Mixer Mode control surface does not contain a keyboard. You must follow the steps above to ensure
both control surfaces are found.
Reason and Panorama are now connected. You will see the following message on Panorama's display:
"To use Mixer Mode, please lock Panorama Mixer Control Surface to a Mixer device.
Locking to the Master Section is most useful. You can also lock to any Mixer device in the rack and the
ReGroove Mixer. Alternatively, select Instrument, Transport or Internal mode."
To lock to the Reason 6 mixer, navigate to the Options menu and select "Surface Locking...". For the
Surface select "Nektar Panorama Mixer", and for "Lock to Device" select "Master Section".
If you are using Reason 5, you can lock Mixer mode to the 14:2 mixer and control it the same way as
the larger mixer in Reason 6. The rest of this guide assumes you are using Reason 6.
That's it; you are now ready to experience Panorama communicating with the power of Reason.
Note: The "Lock Nektar Panorama Mixer Mode to this device" setting is stored with your song so you
don't have to set this up every time if you save the setting you
www.nektartech.com www.nektartech.com
Launch Reason
Select the Preference menu in Reason and click on the Control Surfaces tab
Click the button labeled "Auto-detect surfaces"
prefer in your default song.
13
Nektar Panorama P1: User Guide