Connect The Right Cd Player - Native Instruments Traktor Kontrol Z2 Setup Manual

4.8.2

Connect the Right CD Player

1. Connect the left and right audio output cables of the right CD player (L) to the
RCA inputs of the Z2's
2. Make sure the phono/line switch for channel B (on the Z2's top panel) is set to
level amplification.
Notice that the TRAKTOR button next to the switch is unlit. This means that channel A is
operating in Direct mode and that the channel will bypass the TRAKTOR software for
stand-alone operation. For controlling TRAKTOR with Timecode media, you will need to ac-
tivate TRAKTOR mode later on. You will find further information on the Z2's operation
modes later in this document and in the TRAKTOR KONTROL Z2 Manual.
INPUT section.
Setting Up Your TRAKTOR KONTROL Z2 System
LN
TRAKTOR KONTROL Z2 - Setup Guide - 47
Connecting CD Players
LINE B
for line