Getting Started; Switching On For The First Time - EchoStar HDT-610R User Manual

3. Getting Started

Before you switch on the power to your HDT-610R, check the following:
Have you removed the battery insulator tab from the remote control?

Is the unit connected correctly (see page 12)?

Is the TV switched on?


Switching on for the First Time

When you switch on your HDT-610R for the first time, it may take up to a
minute for the unit to power up and display the Setup Wizard (see below).
This will guide you through the process of setting up the HDT-610R and
scanning for Freeview channels.
Follow the on-screen instructions: press OK to start the installation process.
13