Table of Contents
Advertisement
Remote Control
Pull and remove the battery insulator tab to activate the remote control.
Replacing the Batteries
The unit displays a warning message on screen when the batteries need
replacing. Also, the LED on the remote will make an additional flash after a
button has been released.
The remote control is powered by two CR2032 batteries. To install new
batteries:
1. Press the tip of a pointed tool such as a ball-point pen into the hole above
the battery cover (A) as shown below. Press down towards the battery
compartment, not in the direction of the plastic tab you can see through the
hole.
2. At the same time, gently press down on the battery cover grooves and slide
out the battery cover (B).
3. Remove the two CR2032 batteries and replace with new batteries. Make
sure that the '+' mark on the batteries is uppermost and visible.
4. Replace the battery cover securely. Keep batteries out of reach of children.
11
Hide quick links:
Advertisement
Table of Contents
