Maintenance And Cleaning; End Of Programme; Cleaning The Detergent Drawer; Cleaning The Loading Door And The Drum - Beko WDIX7523000 User Manual

Table of Contents

Advertisement

5.20 End of programme

When the programme is over the End
of Programme indicator illuminates
and a buzzer is heard.
If you do not press any button for 2 minutes,
the machine will switch to standby mode.
Display and all indicators are turned off.
If you press any button or turn the Programme
Selection knob when the machine is in
standby mode, programme steps that are
completed will appear on the display.
5.21 Your machine features
a "Standby Mode".
After you switch on your machine with On-Off
button, if no programme is started or no other
procedure is performed at the selection step or
no action is taken within approx. 2 minutes after
the selected programme ends, your machine
will switch to energy saving mode automatically.
Also, if your product has a display that shows
programme time, this display will be completely
turned off. If you turn the Programme Selection
knob or touch any button, lights and display
will switch back to previous condition. The
selections which you make when exiting from
the energy efficiency may change. Please
check the correctness of your selections before
starting the programme. If necessary, please
make your settings again. This is not an error.
32 / EN

6 Maintenance and cleaning

Service life of product extends and frequently
experienced problems will be reduced
if it is cleaned at regular intervals.

6.1 Cleaning the detergent drawer

Remove any powder residue buildup
in the drawer. To do this;
II
II
I
1. You can remove the detergent drawer
by pulling it towards yourself strongly.
C
INFORMATION
• If more than a normal amount of softener
and liquid detergent mixture starts to
remain in the softener compartment,
the siphon must be cleaned.
2. Wash the drawer and the siphon with
plenty of lukewarm water in a washbasin.
Wear protective gloves or use an
appropriate brush to avoid touching the
residues in the drawer when cleaning.
3. Replace the drawer into its housing
after cleaning. Check if the siphon
is in its original location.
6.2 Cleaning the loading
door and the drum
For products with drum cleaning
programme, please see Operating
the product - Programmes.
For products without drum cleaning programme,
follow the below steps to clean the drum:
Washer-Dryer / User's Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents