LG 55EG9100 Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. OLED TV
  5. 55EG9100
  6. Owner's manual
LG 55EG9100 Owner's Manual

LG 55EG9100 Owner's Manual

Hide thumbs Also See for 55EG9100:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
OWNER'S MANUAL
Please read this manual carefully before operating
your TV and retain it for future reference.
55EG9100
*MFL68685926*
www.lg.com
P/NO : MFL68685926 (1510-REV01)

Advertisement

Table of Contents
loading

Related Manuals for LG 55EG9100

Summary of Contents for LG 55EG9100

  • Page 1 OWNER’S MANUAL Please read this manual carefully before operating your TV and retain it for future reference. 55EG9100 *MFL68685926* www.lg.com P/NO : MFL68685926 (1510-REV01)

  • Page 2: Important Safety

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY Read these instructions. Keep these instructions. INSTRUCTIONS Heed all warnings. Follow all instructions. Always comply with the following precautions • Do not allow the television to become wet. to avoid dangerous situations and ensure peak performance of your product.
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS • CAUTION concerning the Power Cord • Protect the power cord from being walked on or pinched particularly at plugs, convenience (Can differ by country): receptacles, and the point where they exit from Check the specification page of this owner’s the apparatus.
  • Page 4 TV, unplug the power cord and contact an • Do not attempt to modify this product in any authorized service center. way without written authorization from LG • Keep the product away from direct sunlight. Electronics. Unauthorized modification could •...
  • Page 5 IMPORTANT SAFETY INSTRUCTIONS • Do not use high voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction. • Dot Defect The panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV.

  • Page 6: Viewing 3D Imaging

    Cautions when using the 3D glasses Symptoms which require discontinuation or refraining from watching 3D contents • Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. • Do not watch 3D content when you feel fatigue •...

  • Page 7: Licenses

    LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.

  • Page 8: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY MAGIC REMOTE FUNCTIONS INSTRUCTIONS Registering Magic Remote How to Use Magic Remote Viewing 3D imaging Precautions to Take When Using the Magic Remote LICENSES USING THE USER GUIDE OPEN SOURCE SOFTWARE NOTICE INFORMATION SPECIFICATIONS TABLE OF CONTENTS...

  • Page 9: Installation Procedure

    INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING INSTALLATION PROCEDURE Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made.
  • Page 10 ASSEMBLING AND PREPARING Remote Control, Owner’s Manual Cable Holder Batteries (AA) (See page 15.) (See page 26.) Cinema 3D Glasses Stand Base Stand Screws The number of 3D glasses may (See page 14.) 4 EA, M4 x L20 differ depending upon the (See page 14.) model or country.

  • Page 11: Optional Extras

    The model name or design may be changed due to the manufacturer’s circumstances or policies. AN-MR6** AG-F***DP AG-F*** Magic Remote Dual Play Glasses Cinema 3D Glasses AN-VC550 LG Audio Device Smart Camera Parts and Buttons Screen Speakers Remote Control Sensor Joystick Button Power Indicator...

  • Page 12: Using The Joystick Button

    ASSEMBLING AND PREPARING Using the Joystick Button You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Basic Functions When the TV is turned off, place your finger on the joystick button, Power On press it once, and release it.

  • Page 13: Lifting And Moving The Tv

    ASSEMBLING AND PREPARING Lifting and Moving the TV • When handling the TV, be careful not to damage the protruding joystick button. • When transporting the TV, do not expose the TV When moving or lifting the TV, read the following to jolts or excessive vibration.
  • Page 14 ASSEMBLING AND PREPARING Packing Brace Stand Cover CAUTION • When assembling the stand, lay the packing brace on a table or product box and then place the TV with its screen facing down on the packing brace. Be sure to protect the screen 4 EA from scratches.

  • Page 15: Mounting On A Table

    ASSEMBLING AND PREPARING Mounting on a Table Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV. (Image shown may differ from your TV) - If there are bolts inserted at the eye-bolts position, remove the bolts first. Lift and tilt the TV into its upright position on a table.

  • Page 16: Mounting On A Wall

    Mounting on a Wall Wall mount bracket (optional) OTW150 An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV.

  • Page 17: Making Connections

    MAKING CONNECTIONS MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device. NOTE •...

  • Page 18: Connecting To An Hd Receiver, Dvd Player, Or Vcr

    MAKING CONNECTIONS Connecting to an HD receiver, DVD Player, or VCR Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration.

  • Page 19: Dvi To Hdmi Connection

    MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.

  • Page 20: Component Connection

    MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. NOTE • If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color.

  • Page 21: Composite Connection

    MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE • If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. •...

  • Page 22: Connecting To A Pc

    MAKING CONNECTIONS Connecting to a PC NOTE • Use an HDMI connection for the best image quality. • Depending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. • In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

  • Page 23: Hdmi Connection Or Dvi To Hdmi Connection

    MAKING CONNECTIONS HDMI Connection or DVI to HDMI Connection Choose method A or B to make connection. Method A: HDMI Connection (*Not Provided) HDMI Method B: DVI to HDMI Connection (*Not Provided) (*Not Provided) AUDIO OUT DVI OUT...

  • Page 24: Connecting To An Audio System

    MAKING CONNECTIONS Connecting to an Audio System You may use an optional external audio system instead of the built-in speakers. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration.

  • Page 25: Connecting A Usb Drive

    MAKING CONNECTIONS Connecting a USB Drive Connect a USB storage device such as a USB flash thumbdrive, external hard drive, or a USB memory card reader to the TV and access the SmartShare menu to use various multimedia files. NOTE •...

  • Page 26: Magic Remote Functions

    MAGIC REMOTE FUNCTIONS MAGIC REMOTE FUNCTIONS When the message Magic remote control battery is low. Change the battery. is displayed, replace the batteries. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching the ends to the label inside the compartment, and close the battery cover.

  • Page 27: Registering Magic Remote

    MAGIC REMOTE FUNCTIONS / USING THE USER GUIDE Registering Magic Remote Precautions to Take When Using the Magic Remote How to register the Magic Remote • Use the remote control within the specified range (within 10 m). You may experience To use the Magic Remote, first pair it communication failures when using the device with your TV.

  • Page 28: Specifications

    Less than 80 % condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % Thickness Depth 55EG9100 MODELS (55EG9100-SB) Dimensions With stand (mm) 1,225 x 760 x 208 Without stand (mm) 1,225 x 719 x 48.9 (87.3)

  • Page 29: Maintenance

    MAINTENANCE / TROUBLESHOOTING MAINTENANCE Cleaning Your TV Clean your TV regularly to keep it at peak performance and to extend the product’s lifespan. CAUTION • Before cleaning, turn the power off and disconnect the power cord and all other cables. •...
  • Page 30 The model and serial numbers of the TV are located on the back and on one side of the TV. Record them below should you ever need service. MODEL SERIAL...
  • Page 31 OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
  • Page 32 KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
  • Page 33 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
  • Page 34 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
  • Page 35 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
  • Page 36 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 37 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
  • Page 38 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 Data Min : 00 to Max : 64 Ack [i][ ][Set ID][ ][OK/NG][Data][x] Ack [r][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) * (Depending on model) ► To adjust the screen tint. 14.
  • Page 39 EXTERNAL CONTROL DEVICE SETUP Data 02 : Input Source (Digital) Step Frequency - 10 : Antenna TV (DTV) 0(decimal) - 20 : Antenna Radio (Radio) 1st Band - 40 : Satellite TV (SDTV) 1(decimal) 2nd Band - 50 : Satellite Radio (S-Radio) 3rd Band - 90 : Cable TV (CADTV) - a0 : Cable Radio (CA-Radio)
  • Page 40 EXTERNAL CONTROL DEVICE SETUP * Digital Antenna/Cable * Digital Antenna/Satellite Data 00: xx (Don't care) Data 00 : xx (Don't care) [Data 01][Data 02]: Major Channel Number [Data 01][Data 02]: Major Channel Number Data 01: High byte Channel Data Data 01 : High byte Channel Data Data 02: Low byte Channel Data Data 02 : Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
  • Page 41 11 11 EXTERNAL CONTROL DEVICE SETUP 22. Key (Command: m c) 25. 3D(Command: x t) (only 3D models) (Depending on model) ► To send IR remote key code. ► To change 3D mode for TV. Transmission [m][c][ ][Set ID][ ][Data][Cr] Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] Data Key code - p.2.
  • Page 42 EXTERNAL CONTROL DEVICE SETUP 26. Extended 3D(Command: x v) (only 3D models) 27. Auto Configure (Command: j u) (Depending on model) (Depending on model) ► To change 3D option for TV. ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) Transmission [x][v][ ][Set ID][ ][Data 00][ ] mode.
  • Page 43 MANUAL DEL USUARIO CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS Lea atentamente este manual antes de poner en funcionamiento el equipo y consérvelo para futuras consultas. www.lg.com...
  • Page 44 CÓDIGOS DE TECLA CÓDIGOS DE TECLA • Esta función no está disponible en todos los modelos. Código Código Función Nota Función Nota (Hexa) (Hexa) CH +, PR + Botón RC Lista Botón RC CH -, PR - Botón RC Salir Botón RC Volumen + Botón RC...
  • Page 45 (TV) (PC) • LGTV admite el uso de un USB a convertidor de serie basado en chip PL2303 (ID de proveedor: 0x0557, RS-232C IN ID de producto: 0x2008) que LG no fabrica ni incluye. (CONTROL & SERVICE) (PC) (TV) •...
  • Page 46 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS (TV) (PC) (TV) (PC) Tipo de adaptador telefónico RS-232C IN RS-232C IN • Para realizar la conexión entre la PC y la TV, que se especifica en el manual, debe comprar el cable de (CONTROL &...
  • Page 47 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS Parámetros de comunicación • Velocidad en baudios : 9600 bps (UART) • Bit de parada: 1 bit • Longitud de datos: 8 bits • Código de comunicación: código ASCII • Paridad: Ninguna • Use un cable cruzado (reversa). Lista de referencia de comandos (según el modelo) Datos...
  • Page 48 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS Protocolo de Transmisión/Recepción Transmisión [Comando1][Comando2][ ][ID del televisor][ ][Dato][Cr] [Comando 1] : Primer comando para controlar la TV. (j, k, m o x) [Comando 2] : Segundo comando para controlar la TV. [ID del televisor] : Puede ajustar [ID del televisor] para elegir el número de ID del monitor que desea en el menú...
  • Page 49 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS * Según el modelo y la señal, los comandos podrán funcionar de un modo diferente. 01. Potencia (Comando: k a) 03. Screen Mute (Silencio de pantalla) (Comando: k d) ► Para controlar el encendido o apagado del dispositivo.
  • Page 50 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS 07. Brillo (Comando: k h) 12. Remote control lock mode (Modo de bloqueo del control remoto) (Comando: k m) ► Para ajustar el brillo de la pantalla. También puede ajustar el brillo en el menú ►...
  • Page 51 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS 16. Color Temperature (Temperatura de color) Datos (Comando: x u) 00: apagado 01: mínimo ► Para ajustar la temperatura de color. También 02: medio puede ajustar Color Temperature (Temperatura 03: máximo de color) en el menú IMAGEN. 04: Automático (para TV LCD/TV LED)/ Transmisión [x][u][ ][ID del televisor][ ][Dato] Intelligent sensor (Sensor inteligente) (para...
  • Page 52 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS Hay dos bytes disponibles para cada dato de ID del televisor = Todo = 00 canal mayor y menor, pero generalmente, solo se Datos 00 & 01 = Datos de canal es 1000 = 03 E8 usa el byte más bajo (los bytes altos son de 0).
  • Page 53 11 11 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS 2. Sintonizar el canal BC (ISDB-BS) 30. 24. Input select (Selección de entrada) (Comando: ID del televisor = Todo = 00 x b) Datos 00 = No conoce Físico = 00 (Entrada de la imagen principal) Datos 01 &...
  • Page 54 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS * Es posible que todas las opciones del patrón de 5) Cuando [Dato 00] es 09 3D ([Datos 01]) no estén disponibles según la 00: Estándar 01: Deportes transmisión/señal de video. 02: Cine 03: Extremo 04: Manual 05: Automático [Dato 00]...

Table of Contents