Getting Started With Champion Pro; About The Receiver; Parts Of The Receiver; Front Panel - Champion PRO User Manual

2. G C PRO
ETTING STARTED WITH THE HAMPION
2.1. A
BOUT THE RECEIVER
The Champion PRO GNSS receiver incorporates a GNSS engine, GNSS antenna,
internal radio, 3G cellular modem, Bluetooth, Wi-Fi and battery in a ruggedized
and miniature unit. Either unit may be a base, rover or used without other
devices for static collection.
The receiver can be used as the part of a Network RTK GNSS system with Carlson
SurvCE, MicroSurvey Field Genius or CHC LansStar7 Android software. Static
positions can be stored in Rinex 2.11 format for easy OPUS submittal using only
the receiver. The Static data can be stored in internal memory, a USB flash drive
using the optional OTG cable or sent to your FTP using the internal 3G GSM
modem!
When using the Champion Pro without additional equipment configuration of
the many features is accomplished through a web browser. CHC LandStar7 may
also be downloaded from the android app store. Static positions can be taken by
pressing the function button for 5 seconds.
2.2. P
ARTS OF THE RECEIVER
The operating controls are all located on the front panel. Battery compartment,
SIM card slot, serial ports and connectors are located on the bottom of the unit.
2.2.1. F
RONT PANEL
The following figure shows a front view of the receiver.
Page
Champion PRO GNSS Receiver User Guide
4